Tabla de contenido
Idiomas disponibles
Idiomas disponibles
710.1760.00.01-03A
Type
B
degrees Celsius
bar
Compressor 1
Unit in standby*
High-pressure alarm
Antifreeze heating activated
Flow alarm
Water pump: symbol lights up when
water pump is active
Type
C
degrees Celsius
bar
Compressor 1
Compressor 3
Compressor 5
Antifreeze heating activated
Flow alarm
Water pump: symbol lights up when
water pump is active
These delay times are preset for the compressor:
Delay type
Description
Delay at start-up
Set a time delay at compressor start-up to graduate the start-
(power ON)
ing current of the chiller and so that the compressor is protect-
ed against repeated start-ups when there is an interruption in
the power supply.
Minimum operating
Sets the time that the compressor has to remain in operation
time
after it has been switched on, even if there is no further re-
quest for this.
Minimum switching-
Sets the time that the compressor has to remain out of opera-
off time
tion after it has been switched off, even if there is a request to
switch it on. During this phase the LED for the compressor
flashes.
Time interval be-
This sets the minimum switch-off interval between two consec-
tween two consecu-
utive ON routines for the compressor (the maximum number of
tive ON routines
ON routines per hour is displayed). During this phase the LED
for the compressor flashes.
Delay in switching on
This sets the time between switching on the pump and switch-
the compressor after
ing on the compressor.
switching on the
pump
CHW 29 to 602
CHO 29 to 149
CHG 24 to 140
degrees Fahrenheit
PSI
Compressor 2
General alarm
Low-pressure alarm
Time display
Function menu activated
Condenser fan: symbol lights up when the dig-
ital output (relay) is configured as a fan
ON/OFF or symbol lights up when the propor-
tional output to the condenser fan is active.
CHW 682 to 1202 (Checklist 1)
CHW 1452 to 3652 (Checklist 2)
CHG 180 to 365 (Checklist 1)
degrees Fahrenheit
PSI
Compressor 2
Compressor 4
Compressor 6
General alarm
Time display
Condenser fan: symbol lights up when the
digital output (relay) is configured as a fan
ON/OFF or symbol lights up when the propor-
tional output to the condenser fan is active.
22
14/11/2012
Controller
Controller
Controller
Type "A"
Type "B"
Type "C"
/
~300
~300
/
~60
~60
/
~60
~60
~360
/
/
/
~10
~10
Capítulos
Tabla de contenido
