Applications; Conformity And Approval; Overview; Receiver - IMG STAGELINE TXS-611SET Manual De Instrucciones

Wireless Microphone System
These instructions are intended for users without
any specific technical knowledge . Please read
these instructions carefully prior to operation
and keep them for later reference .
All operating elements and connections de-
scribed can be found on page 2 .
Contents
1 Applications . . . . . . . . . . . . . . 8
1 .1 Conformity and approval . . . . . . . . 8
2 Overview . . . . . . . . . . . . . . . 8
2 .1 Receiver . . . . . . . . . . . . . . . . 8
2 .2 Wireless microphone . . . . . . . . . . 9
3 Safety Notes . . . . . . . . . . . . . 9
4 Before Operation . . . . . . . . . . . 9
4 .1 Connecting the receiver . . . . . . . . 9
4 .2 Inserting batteries into the microphone 9
4 .3 Setting the transmission power . . . . 10
4 .4 Adjusting the transmission channel . . 10
5 Operation . . . . . . . . . . . . . . 10
6 Specifications . . . . . . . . . . . . 11

1 Applications

This multi-frequency microphone system op-
erating in the UHF range is capable of wireless
transmission of speech and vocals to an amplifier
system . Thus, it is ideally suited for applications
requiring total freedom of movement, e . g . for
stage shows, DJ applications, sports events .
The ACT function (automatic channel tar-
geting) is a most convenient feature of the sys-
tem: Simply press a button to adjust the wireless
micro phone to the channel selected on the re-
ceiver via IR signal .
The microphone system includes:
1 receiver in True Diversity technology*
1 plug-in power supply unit for the receiver
1 audio cable (2 × 6 .3 mm plug)
1 wireless microphone
* True Diversity technology
The signal coming from the wireless microphone is re-
ceived by two antennas and amplified in two separate
receiving parts . The signal offering the best reception
quality is then processed .
8

1.1 Conformity and approval

Herewith, MONACOR INTERNATIONAL de-
clares that the product TXS-611SET complies
with Directive 2014 / 53 / EU . The full text of the
EU declaration of conformity is available at the
following internet address:
www .img-stageline .com
The product is generally approved for operation
in EU and EFTA countries . No registration or
licence is required for operation .

2 Overview

2.1 Receiver

1 Receiving antennas A and B
2 Button SELECT for channel adjustment
- To automatically scan a free transmission
channel, press the button briefly .
- To manually adjust a channel, keep the
button SELECT pressed until the units digit
on the display (3) starts flashing . Press the
button briefly to adjust the units digit . Keep
the button pressed again until the tens
digit on the display starts flashing . Press the
button briefly to adjust the tens digit . (The
frequencies corresponding to the channels
can be found in the table on page 3 .)
3 Display for channel indication
4 LED AF (audio frequency): lights up when the
received audio signal exceeds a defined level
5 Reception LEDs RF (radio frequency) A and B:
to indicate which of the two receiving parts
of the device receives the more powerful
radio signal
6 IR window for the IR signals to adjust the
channel of the wireless microphone
7 Button ACT for sending the IR signals to ad-
just the channel of the wireless microphone
8 Power supply jack to connect the power
supply unit provided
9 POWER switch
10 XLR audio output for connection to a mi-
crophone input
11 Audio output (6 .3 mm jack) for connection
to a line input