Operation Notes; Starting The Filtration Process; Stopping The Filtration Process Prematurely; Starting The Return Process - VITO X Serie XS Manual De Instrucciones

8.2 Operation notes

• BEFORE YOU START WORKING WITH VITO YOU MUST TURN OFF THE FRYER.
• The filtration process and the return process can be interrupted anytime by pushing the POWER button (11).
• DO NOT MOVE VITO WHILE FILTRATION IS IN PROCESS!
• DO NOT USE VITO in an inclined position!
• DO NOT use VITO without the filter basket (23)!
• DO NOT use VITO without closing the top-cover (1)!
• For safety reasons, VITO ends the pumping / filtration process automatically after 5 minutes.
• For safety reasons, VITO automatically turns off the heater after 30 minutes.
• During the operation the POWER indicator (11a) and either the FILTER indicator (12a) or RETURN indicator (13a) lights.
VITO X-Series filtration process

8.3 Starting the filtration process

1. Turn off the deep fryer.
2. Place VITO securely next to the fryer. Use the castor with total lock (10).
3. Plug in VITO. Cooling fan must work.
4. Put lance (7) into the fryer and hold it tight or ensure a secure hold.
5. First turn the switch lever (4) to "FILTER" position, push the POWER button (11). The POWER indicator (red LED) (11a) must be
lit. Then press the FILTER button (12).
6. During the filtration, the FILTER indicator (green LED) (12a) must be lit.
7. When the maximum level in the tank (18) is reached, VITO automatically switches off the filtration. The FILTER indicator
(green LED) (12a) flashes and an acoustic signal can be heard.

8.4 Stopping the filtration process prematurely

1. Take the lance (7) out of the oil immediately.
2. Let the filtration process continue for 10 seconds.
3. Press the POWER button (11). The POWER indicator (11a) must be off.
4. Place the lance (7) in the lance holder (8).
5. Unplug VITO.

8.5 Starting the return process

1. Turn off the deep fryer.
2. Place VITO securely next to the fryer. Use the castor with total lock (10).
3. Plug in VITO. Cooling fan must work.
4. If you are using fat instead of liquid oil, press the HEATER button (14). The heater indicator (green LED) (14a) must
be lit. Wait until the fat is liquid.
5. Put lance (7) into the fryer and hold it tight or ensure a secure hold.
6. Press the POWER button (11) and the the RETURN button (13). Now slowly turn the switch lever (4) to the "RETURN" position.
7. RETURN indicator (13a) and POWER indicator (11a) must be lit during the return process.
CAUTION AT THE BEGINING OR THE END OF THE BACK PUMPING PROCESS AIR ESCAPES OUT OF THE HOSE,
WHICH MAY LEAD TO BUBBLES AND SPLASHING.

8.6 Stopping the return process prematurely

1. End the pumping process by pressing the RETURN button (13). RETURN indicator (13a) must be off.
Now carefully lift the lance (7) out of the oil. Hold the lance (7) over the deep fryer.
2. Push the FILTER button (12) and then turn switch lever (4) to "FILTER". Then turn the switch lever (4) to "RETURN".
Hint: Make this process 2 or 3 time to make sure that the system is empty from oil or fat.
The rest of the oil or fat will be in the tank. Press FILTER button (12) to end the process.
3. Press the POWER button (11). The POWER indicator (red LED)(11a) must be off.
4. Place the lance (7) in the lance holder (8).
5. Unplug VITO.
Page 6