TREND NETWORKS FIBERMASTER Guía De Referencia Rápida página 11

Getting started with the Video Inspection Scope
To operate the video scope, touch the Scope icon on the Home Screen.
If a probe is not connected already,
connect the Video Inspection Probe
R240-VIP to the video probe port
on the top of the OTDR.
Place proper tip on VIP
Adapter Tip
Focus Ring
To remove a tip from the probe, grasp the probe tip and unscrew the tip
retention nut. As oriented in the picture; rotate left to loosen and right to
tighten the retention nut on the probe tip. Pull the tip straight up from the
probe. To place a tip on the probe, ensure the lens is clean, slide the tip on to
the end of the probe and tighten the tip retention nut. Do not over tighten the
retention nut.
Tip Retention Nut
Depend On Us
EN
11