First Time Use - Honeywell PROFESSIONAL HPA600 Serie Manual Del Propietário

FIRST TIME USE

There are two 3-in-1 HEPA Filters supplied within your air purifier. These
filters provide three stages of cleaning performance: HEPA filter media that
helps capture up to 99.97% of airborne particles as small as 0.1 micron
antimicrobial coating that inhibits growth of bacteria on filters
carbon granules help adsorb odors and VOCs. The filters are wrapped to
ensure purity, and are labeled to help identify the proper replacement filter
(Type filters should be replaced 1x/year). Before using your new air
Z
Filter Filter
purifier, you must remove the wrappers covering the filters.
• Make sure the air purifier is OFF and unplugged.
• Open the rear door to remove the filters . Remove the HEPA Filters from
the two sides of the unit (see Fig. 2).
• Remove the filters from the plastic bags.
• Install the filters into the unit with the red pull tabs facing outward
(this will facilitate filter removal later). The side of the filter with the carbon
granules (black side) and foam seal should be facing in to the purifier
housing (see Fig. 3).
• Close the rear door and plug the unit into an outlet. You are now ready to
use your new Honeywell Professional Series™ True HEPA Air Purifier.
From the air that passes through the filters.
1
Based on independent testing using AATCC100-2012 test method measuring bacterial inhibition and bactericidal properties of fabrics and nonwovens.
2
OPERATION
The energy efficiency of this ENERGY STAR certified model is measured based on a ratio between the model's
CADR for Smoke and the electrical energy it consumes, or CADR/Watt.
Portable air purifiers are more effective in rooms where all doors and windows are closed. It is recommended that
you run your air purifier while you are at home to help clean the air. If desired, or conditions warrant, you may run
your air purifier 24 hours a day.
• Ensure the air purifier is plugged into a working electrical outlet. A chime will sound and the power light will
illuminate when plugged in.
• Tap the power icon
cleaning level is selected.
• Tap the Cleaning Level
once. The unit will start at cleaning level 2 and remain on this setting until another
icon to select a different cleaning level.
,
1
, and activated
2
5
Fig. 2
Fig. 3