All manuals and user guides at all-guides.com
Manual TANGO 50-ING v4.qxp
15/05/2007
13:24
Página 25
LUBRICATION
Engine lubrication uses an oil pump which is located inside the oil sump.
The gearbox and clutch use the same oil and the recommended type is
CASTROL MTX SAE 10W-40, with a total capacity of 820 c.c.
The oil sump may be drained using the drain screw located at the lower
left of the engine. It is recommended that the oil change operation be
carried out while the engine is still warm as the sump will be cleaner and
the oil will drain out with greater ease because it will be more fluid.
Fill-dipstick cap
Remove the drainage screw and allow it to empty completely.
Replace the screw once it is empty and refill by removing the dip-stick. One litre must be poured in since
if the motor is not started, approximately 200 c.c. will always remain inside.
25