Steam Cleaning Hard Floors; Refreshing Carpets - Reliable Steamboy PRO T3 Manual De Instrucciones

STEAM CLEANING HARD FLOORS

NOTE: Always sweep or vacuum the floor prior to use to remove any loose
dirt or debris.
IMPORTANT: Do not use the cleaner without a microfiber pad attached to the
floor head.
NOTE: Do not use the carpet glide when cleaning hard floors.
1. Plug the steam cleaner into the main power. The blue ON light will illuminate.
2. After a few seconds the green Steam Ready light will illuminate indicating the
cleaner is ready for use.
3. Recline the cleaner by placing a foot on the floor head and lowering the main
body towards the floor. [9]
4. To produce steam press the Steam Trigger Button. [10]
5. Move the cleaner slowly backwards and forwards paying particular attention
to high traffic areas. [11]
STEAM CLEANING HARD FLOOR – INTENSIVE
CLEAN
Use the triangular floor brush on hard floors that require deep cleaning. Please
note that there is no mop to allow the steam to be aimed directly at the surface to
clean more intensely. The area will have to be mopped separately.
NOTE: Always sweep or vacuum the floor prior to use to remove any loose dirt
or debris.
1. Remove the floor brush from the floor head by pressing the release pedal at
the rear. Lift the cleaner with floor brush attached out of the floor head. [12]
2. Plug the steam cleaner into the main power. The blue ON light will illuminate.
After a few seconds the green Steam Ready light will illuminate indicating the
cleaner is ready for use.
3. Recline the cleaner by placing a foot on the floor brush and lowering the main
body towards the floor. [13]
4. To produce steam press the steam release button. [10]
5. Move the cleaner slowly backwards and forwards paying particular attention
to high traffic areas. [14]

REFRESHING CARPETS

NOTE: Always sweep or vacuum the floor prior to use to remove any loose dirt
or debris.
IMPORTANT: Do not use the cleaner without a microfiber pad attached to the
floor head.
9