Cleaning, Maintenance And Storage - Probuilder 43660 Manual De Instrucciones

Cleaning, maintenance and storage

Warning!
Before performing any cleaning or
maintenance work, ensure that the power
cord has been disconnected. Risk of injury
due to electric shock!
Warning!
Wait until the device has cooled completely.
Risk of burns!
Warning!
Before performing any cleaning and/or
maintenance work, depressurize the device!
Risk of injury!
Cleaning
• Keep the device as clean and dust-free as
possible. Use a clean cloth the wipe the
device or use low-pressure compressed
air to blow clean the device.
• We recommend that you clean the device
directly after using it.
• Regularly clean the device with a moist
cloth and a little mild soap. Do not use
any cleaning or solvent solutions: these
could attack the plastic materials used on
the device. Make sure that no water can
penetrate the device.
• The hose and the spraying tools must
be disconnected from the compressor
before cleaning. Do not clean the
compressor with water, solvent solutions
or similar.
• Always transport the equipment in an
upright position. Avoid bumping against
the � ttings.
Storage
Warning!
Disconnect the power plug and then
vent the device as well as all connected
compressed-air tools. Put away the
compressor in such a way that it cannot be
started up by any unauthorized persons.
Warning!
Store the compressor in a dry environment
and where it cannot be accessed by any
unauthorized person. Do not tilt, always
store in an upright position.
Storing power plug, hose and accessories
• The power cord can be stored in the
lateral compartment on the compressor
• The pressure hose can be stored in the
tool compartment.
GB
79