Additional Safety Instructions - Probuilder 43660 Manual De Instrucciones

Additional safety instructions

Safety instructions for working with
compressed air and blow guns
• During operation, the compressor pump
and lines become very hot. Contact with
them will cause burns.
• The air drawn in by the compressor
must be kept free of impurities that
could cause � res or explosions in the
compressor pump.
• When disconnecting the hose coupling,
� rmly hold the coupling part of the hose
with your hand. This will prevent injuries
caused by the hose recoiling.
• Wear protective goggles when working
with the blow gun. Foreign bodies
and parts blown away can easily cause
injuries.
• Do not use the blow gun to blow on
persons or to clean clothing on the body.
Risk of injury!
• At pressures above 7 bar, it is
recommended that feed hoses should be
equipped with a safety cable, e.g. a wire
rope.
Safety instructions for paint spraying
• Do not use any paints or solvents with a
� ash point of less than 55°C. Danger of
explosion!
• Do not heat paints and solvents. Danger
of explosion!
72
• When handling/working with harmful
liquids, � lter devices (face masks) are
required for protection. Also observe
the information on protective measures
provided by the manufacturers of such
substances.
• Observe the information and labels of
the Hazardous Substances Ordinance
applied to the outer packaging of
the processed materials. If necessary,
additional protective measures must be
taken, particularly suitable clothing and
masks must be worn.
• Smoking is not permitted during the
spraying process or in the work area.
Danger of explosion! Paint vapors are
also highly � ammable.
• Fireplaces, naked lights or sparking
machines must not be present or
operated.
• Do not store or consume food and
beverages in the work area. Paint vapors
are harmful to health.
• The work area must be larger than 30
m³ and suffi cient air exchange must be
ensured during spraying and drying.
• Do not spray against the wind. Always
observe local police authority regulations
when spraying � ammable or hazardous
sprayable substances.
• Do not use media such as white spirit,
butyl alcohol and methylene chloride in
conjunction with the PVC pressure hose.
These media destroy the pressure hose.