Tabla de contenido
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
Frothing milk only (fig. A)
•
Place the appliance on a stable and flat
surface.
•
Remove the lid (4) from the milk jar (2).
•
Insert the frothing paddle (7) into the milk
jar (2).
•
Fill the milk jar (2) with the required amount
of milk (max. 100 ml).
•
Place the lid (4) onto the milk jar (2).
•
Place the milk jar (2) onto the base (8).
•
Insert the mains plug into the wall socket.
The on/off indicator (1) lights red.
•
Press the on/off button (1) 3 times within
2 seconds. The on/off indicator (1) flashes
blue. The appliance starts to froth the milk.
•
To interrupt the process, press the on/off
button (1).
•
If the process is completed, the appliance
will switch off automatically. The on/off
indicator (1) lights red.
•
Remove the mains plug from the wall socket.
•
Remove the milk jar (2) from the base (8).
•
Remove the lid (4) from the milk jar (2).
•
Pour the milk froth into a cup of coffee.
Note: If you want to use the appliance again,
wait for at least 3 minutes between two
continuous cycles. The appliance will go to
self-protection mode after operating continuously
for five cycles. The on/off indicator will flash
blue to indicate that the appliance cannot be
operated. After approximately 5 minutes,
the appliance will go to stand-by mode. The
appliance can be operated again.
Heating milk only (fig. A)
The appliance can be used for heating milk only.
Before you proceed, we need you to pay
attention to the following notes:
-
Do not remove the lid from the milk jar
during the milk heating process.
Before you proceed, we would like you to
focus your attention on the following notes:
-
If you use to appliance for heating milk
only, make sure that the mixing paddle is
inserted in the milk jar.
•
Place the appliance on a stable and flat
surface.
•
Remove the lid (4) from the milk jar (2).
•
Insert the mixing paddle (6) into the milk
jar (2).
•
Fill the milk jar (2) with the required
amount of milk (max. 200 ml).
•
Place the lid (4) onto the milk jar (2).
•
Place the milk jar (2) onto the base (8).
•
Insert the mains plug into the wall socket.
The on/off indicator (1) lights red.
•
Press the on/off button (1) 2 times within
2 seconds. The on/off indicator (1) lights
blue. The appliance starts to heat the milk.
•
To interrupt the process, press the on/off
button (1).
•
If the process is completed, the appliance
will switch off automatically. The on/off
indicator (1) lights red.
•
Remove the mains plug from the wall socket.
•
Remove the milk jar (2) from the base (8).
•
Remove the lid (4) from the milk jar (2).
•
Pour the milk into an empty glass or mug.
Note: If you want to use the appliance again,
wait for at least 3 minutes between two
continuous cycles. The appliance will go to
self-protection mode after operating continuously
for five cycles. The on/off indicator will flash
blue to indicate that the appliance cannot be
operated. After approximately 5 minutes,
the appliance will go to stand-by mode. The
appliance can be operated again.
Cleaning and maintenance
Before you proceed, we need you to pay
attention to the following notes:
-
Before cleaning or maintenance, always
switch off the appliance, remove the mains
plug from the wall socket and wait until
the appliance has cooled down.
-
Do not immerse the appliance in water or
any other liquids.
Before you proceed, we would like you to
focus your attention on the following notes:
-
Do not use aggressive or abrasive cleaning
agents to clean the appliance.
-
Do not use sharp objects to clean the
appliance.
-
It is not recommended to wash the
removable parts of the appliance or the
accessories in a dishwasher.
8
Tabla de contenido
