Initial Use - Princess 242201 Manual

All manuals and user guides at all-guides.com
Congratulations!
You have purchased a Princess appliance.
Our aim is to provide quality products with
a tasteful design and at an affordable price.
We hope that you will enjoy this appliance
for many years.
Description (fig. A)
Your 242201 Princess milk frother has been
designed for frothing milk and heating milk.
The appliance is suitable for indoor use only.
The appliance is suitable for domestic use only.
The maximum capacity of the milk jar is 450 ml.
The maximum capacity for frothing milk is
100 ml. The maximum capacity for heating milk is 200 ml.
1. On/off button / On/off indicator
2. Milk jar
3. Milk level indicator
4. Lid
5. Handgrip
6. Mixing paddle
7. Frothing paddle
8. Base

Initial use

• Clean the appliance. Refer to the section
"Cleaning and maintenance".
• Clean the accessories. Refer to the section
"Cleaning and maintenance".
Use (fig. A)
Before you proceed, we need you to pay
attention to the following notes:
- Only use the appliance with the supplied
base.
- Before filling the milk jar, switch off the
appliance and remove the mains plug from
the wall socket.
Before you proceed, we would like you to
focus your attention on the following notes:
- Do not use the appliance without milk in
the milk jar.
- Do not exceed the maximum mark when
you fill the milk jar (fig. A).
- Do not fill the milk jar with more milk than
required. Only use the amount of milk
required for frothing or heating the milk.
Frothing milk (fig. A)
The appliance can be used for heating and
frothing milk and for frothing milk only.
Before you proceed, we need you to pay
attention to the following notes:
- Do not remove the lid from the milk jar
during the milk frothing process.
Before you proceed, we would like you to
focus your attention on the following notes:
- If you use to appliance for frothing milk,
make sure that the frothing paddle is
inserted in the milk jar.
Heating and frothing milk (fig. A)
• Place the appliance on a stable and flat
surface.
• Remove the lid (4) from the milk jar (2).
• Insert the frothing paddle (7) into the milk
jar (2).
• Fill the milk jar (2) with the required amount
of milk (max. 100 ml).
• Place the lid (4) onto the milk jar (2).
• Place the milk jar (2) onto the base (8).
• Insert the mains plug into the wall socket.
The on/off indicator (1) lights red.
• Press the on/off button (1). The on/off
indicator (1) lights blue. The appliance
starts to heat and froth the milk.
• To interrupt the process, press the on/off
button (1).
• If the process is completed, the appliance
will switch off automatically. The on/off
indicator (1) lights red.
• Remove the mains plug from the wall socket.
• Remove the milk jar (2) from the base (8).
• Remove the lid (4) from the milk jar (2).
• Pour the milk froth into a cup of coffee.
Note: If you want to use the appliance again,
wait for at least 3 minutes between two
continuous cycles. The appliance will go to
self-protection mode after operating continuously
for five cycles. The on/off indicator will flash
blue to indicate that the appliance cannot be
operated. After approximately 5 minutes,
the appliance will go to stand-by mode. The
appliance can be operated again.
7