Cloud - Gewiss JOINON EASY GW68122 Manual De Uso E Instalación

JOINON EASY electric vehicle recharging unit
38
To delete an RFID card from the local list:
# Action to be carried out
Swipe the MASTER key across the RFID scanner to enable
1
the storage phase
Swipe the MASTER key across the RFID scanner again to
2
enable the deletion phase
Swipe the card that you want to delete across the RFID
3
scanner
To quit the RFID card storage menu, swipe the MASTER key
4
across the RFID scanner
To enable a recharging session:
# Action to be carried out
1 Make sure there are no errors on the charging station
Swipe an RFID card across the scanner, close to the graphic
2
symbol
If the card is recognised (i.e. it's in the local list), the charg-
3 ing station is activated to begin the recharging session, and
waits for the car to be connected
Once the car has been connected, the station checks that
4
everything is OK for the recharging session
If there are no problems, the charging station will block the
5 plug in the socket-outlet both electrically and mechanically.
The recharging session begins
6 The car is asking the charging station for energy
7 Recharging session in progress
To end the charging session, take the same RFID card
used to launch the session and swipe it across the scanner
8
again. The station ends the charging session by releasing
the plug from the Type 2 socket-outlet
Take the plug out of the socket-outlet on the charging
9
station side
10 If the station detects no errors, it will return to standby

10.3. CLOUD

In this mode, the charging station is connected to a control centre. The recharging service is only enabled for users
registered with the JOINON service (via the JOINON app or the website). To enable and interrupt the charging
session, follow the information given on the app. The app also shows the cost of accessing the service, which may
vary from one station to another.
RGB LED status
From fixed green to flashing white
From flashing white
to flashing red
Fixed green for 2 seconds
From flashing red
to fixed green
RGB LED status
Fixed green
Fixed green
Flashing green
Flashing green
Flashing blue
Fixed blue
Fixed blue
From fixed blue or flashing blue
to flashing green
From flashing green to fixed green
Fixed green