Gewiss JOINON EASY GW68122 Manual De Uso E Instalación página 34

JOINON EASY electric vehicle recharging unit
Connection procedure
1. Open the casing as shown in the figure.
1
1
2
2
2. Drill the back-mounting box using a multi-diameter drill (not supplied) at the top or the bottom as required.
3
3
GW 52 401
GW 52 401
3. Connect the power supply cable to the input terminal block, then tighten the cable using the cable gland.
L1 L2 L3 N PE
4. Once the electrical system is complete, the system is ready to be turned on. Make sure the miniature circuit
breaker installed inside the station is in position "1".
If the station identifies a malfunction, the light will turn red.
34