Idiomas disponibles
Idiomas disponibles
Configuring the Machine
When the power is turned ON for the first time after installing the machine, the Setup Guide screen is
displayed. It is recommended that you follow the instructions that appear on the touch panel display to
configure the machine.
NOTE
You cannot exit the Setup Guide until it is finished.
)
You can restart the Setup Guide from [Start Setup Guide] (
)
[License/Other]).
You can change settings registered in the Setup Guide from the items in
)
information, see "Changing Specified Settings, " on p.26.
For most settings in the Setup Guide, you can move to the next setting even without entering anything. Unset items
)
can be set separately. You can set them after finishing the Setup Guide.
If the power is turned OFF while using the Setup Guide, when you turn the power back ON, the Setup Guide is
)
automatically started. Perform Setup Guide settings once again.
Once the Setup Guide has been completed, it will not start up again when turning ON the machine.
)
01
Configuring the Touch Panel Display's
Language and Keyboard Layout
1. Set the language and keyboard layout → press [OK].
20
Configuring the Machine (Setup Guide)
(Setup Guide)
(Settings/Registration) > [Management Settings] >
02
Registering the Information of Paper
That Was Loaded When Installing the Machine
1. Select the paper source that you want to set the
paper type for → press [Set].
2. Select the paper type → press [OK].
If you select [Plain], you can select the paper weight
from [Plain Paper Weight Set.].
If there is no button for the loaded paper, press
[Detailed Settings] → select the paper type from the
detailed setting screen.
(Settings/Registration). For more
Capítulos
