Setting Up The System - Denon AVR-3803 Instrucciones De Operación

Remote control unit
• For details on the functions of these parts, refer to the pages given in parentheses ( ).
ZONE 2 buttons ...........................(30)
Mode selector
buttons ................(19, 20, 22, 26, 30)
Input source selector
buttons ....(19, 21, 26, 33, 35, 39~41)
BACKLIGHT button
System buttons ...............(19, 21, 22)
SYSTEM SETUP/SETUP
button ..............................(10, 18, 35)
Cursor buttons
................(10~18, 20~25, 31~37, 42)
ON SCREEN/DISPLAY button ..(29, 39)
TEST TONE button ......................(31)
SYSTEM CALL buttons................(22)
7

SETTING UP THE SYSTEM

• Once all connections with other AV components have been completed as described in "CONNECTIONS"
(see pages 4 to 8), make the various settings described below on the monitor screen using the AVR-3803's
Remote control signal
on-screen display function.
transmitter ...................................(19)
These settings are required to set up the listening room's AV system centered around the AVR-3803.
• Use the following buttons to set up the system:
• Check that the remote control unit is set to AMP mode.
Power button.........................(20~26)
ZONE 1/MAIN buttons.................(30)
Tuner system/System
button ........................(21, 30, 39~41)
• System setup items and default values (set upon shipment from the factory)
Surround buttons
..................................(27, 28, 32~36)
Speaker
Configuration
Surround
Master volume control q
Speaker Setting
buttons...................................(27, 30)
Crossover
Frequency
MUTING button ...........................(28)
Subwoofer
mode
SURROUND PARAMETER
button ........................(32~34, 36, 37)
w
Delay Time
CH SELECT/ENTER button
.........(10~18, 20~25, 31~33, 35, 37)
e
Channel Level
RDS/RETURN button.......(21, 40~42)
Digital In
r
SURROUND SPEAKER/
Assignment
SURROUND BACK buttons ...(29, 34)
INPUT MODE selector
buttons.......................(26, 27, 33, 35) t
Video Setup
Dolby Digital
y
Setup
u
Zone2 Control
SYSTEM SETUP button
Press this to display the system setup menu.
CURSOR buttons
0 and 1: Use these to move the cursors (0 and 1) to
• and ª: Use these to move the cursors (• and ª) to
ENTER button
Press this to switch the display.
Also use this button to complete the setting.
System setup
Input the combination of speakers in your system and their
Front Sp.
corresponding sizes (Small for regular speakers, Large for full-
size, full-range) to automatically set the composition of the
signals output from the speakers and the frequency response.
Large
Use this function when using multiple surround DOLBY/
Surround
speaker combinations for more ideal surround DTS
mode
sound. Once the combinations of surround SURROUND
speakers to be used for the different surround
modes are preset, the surround speakers are
Surround
selected automatically according to the surround
A
speaker
mode.
Set the frequency (Hz) below which the bass sound of the
various speakers is to be output from the subwoofer.
This selects the subwoofer speaker for playing deep bass
signals.
Front L & R
This parameter is for optimizing the timing with which the
audio signals are produced from the speakers and subwoofer
according to the listening position.
3.6 m (12 ft)
Front L Front R
This adjusts the volume of the signals output from the speakers
and subwoofer for the different channels in order to obtain
optimum effects.
0 dB 0 dB
Input
CD DVD
source
This assigns the digital input jacks for the different
input sources.
Digital
COAX1 COAX2
Inputs
DVD VDP
Component This assigns the color difference (component)
In Assign video input jacks for the different input sources.
VIDEO1 NONE
Video Input Set the input signal to be output from the
Mode monitor output terminal.
Turn the audio compression on or off when down-mixing Dolby
Digital signals.
Power AMP Set this to switch the surround back channel's
Assignment power amplifier for use for zone 2.
Zone2 vol. This sets the output level for the zone 2 output
Level jacks.
ENGLISH
the left and right on the screen.
the up and down on the screen.
Default settings
Center Sp. Sub Woofer Surround Sp. A /B Surround Back Sp.
Small Yes Small Small / 2spkrs
5CH/7CH DSP
WIDE SCREEN EXT. IN
STEREO SIMULATION
A A A A
80 Hz
LFE
Center Sub Woofer Surround L & R SBL & SBR
3.6 m (12 ft) 3.6 m (12 ft) 3.0 m (10 ft) 3.0 m (10 ft)
Surround Surround Surround Surround
Center Subwoofer
L R Back L Back R
0 dB 0 dB 0 dB 0 dB 0 dB 0 dB
VDP TV DBS V. AUX VCR-1 VCR-2 CDR/TAPE
OPT1 OPT2 OPT3 OFF OPT4 OFF OPT5
TV DBS VCR-1 VCR-2 V. AUX —
NONE VIDEO2 NONE NONE NONE —
AUTO
OFF
Surround Back
Variable
9