Setting The Sleep Timer For Zero Client; Changing The Monitor Settings With The Buttons Of The Control Panel - Fujitsu Zero Client DZ19-2 Manual De Instrucciones

Operation

Setting the sleep timer for Zero Client

You can define a sleep timer, which puts the Zero Client to sleep if no inputs are made over
a specified period of time using input devices such as mouse or keyboard.
► To start the Zero Client Control Panel program, double-click on the icon in the taskbar.
► Select Display and Put Zero Client to Sleep.
► Define the time after which the Zero Client should be put to sleep.
► Confirm with OK or Apply.

The Zero Client is put to sleep after the time set has elapsed. The Zero Client
has a very low energy consumption in sleep mode.
If the on/off switch of the Zero Client is pressed, the Zero Client is switched
back to normal operating mode.
If Put Zero Client to Sleep is not active in the Zero Client Control Panel program,
contact your administrator to obtain corresponding rights to set the sleep timer. To
do this, the administrator sets the tick in the User Power Sleep Overrides field in the
Zero Client Controller under Clients - Settings - Login Preferences.
Changing the monitor settings with the
buttons of the control panel
The buttons of the control panel have two functions. When the OSD menu is not
activated, you can call up quick start functions which are printed on the buttons. When the
OSD menu is activated, the navigation buttons (softkeys) displayed on the monitor apply.
1 = Buttons for the OSD menu (On
Screen Display)
2 = On/off switch or log-out from
Virtual Desktop
Fujitsu Technology Solutions
1
3 = Power supply indicator
English - 21
3
2
23