Cleaning And Maintenance; Ironing Tips - Orbegozo VP 8550 Manual De Instrucciones

VP 8550
7. If you need to activate the "STEAM JET" function to remove stubborn creases, press the
sprayer twice (cannot be used twice in a row, you must wait a few seconds).
8. After ironing, unplug the appliance from the mains. The sole will remain hot. Never touch it
with your hand, put it on the base until it cools down.
PRECAUTIONS
1. Do not touch the soleplate before it cools down.
2. Never steam at another person.
3. Do not activate the steam function when the iron is on the base.

CLEANING AND MAINTENANCE

Before cleaning, disconnect the appliance from the mains:
1. Clean debris and other dirt from the soleplate with a damp cloth or non-abrasive cleaning
fluid.
NOTE: Do not use chemicals, steel, wood, or abrasive liquids to clean the soleplate.
2. Wipe the top of the iron with a damp cloth. Wipe the drops off the insulating base with a
dry cloth.
3. Clean the inside of the appliance following the instructions in the Self-cleaning section.
NOTES:
1. If the appliance continues to pour water after the CLEAN function is activated, press the
steam nozzle to put it into cleaning mode.
2. If the cleaning indicator continues to flash and the appliance does not enter CLEANING
mode, make sure the temperature dial is set to maximum.
3. When you do not use the appliance for a long period of time, empty the water tank, turn
the dial to minimum.

IRONING TIPS

- Always check if the garment to be ironed has an ironing label. If so, follow those instructions.
- The iron heats up much faster than it cools down. Therefore, you should start by ironing items
that require a lower temperature such as those made with synthetic fiber.
- If the material to be ironed consists of several types of fibers, you must always choose the
lowest recommended temperature among all the fibers.
- Silk and other shiny fabrics must be ironed inside.
19