Electrical Installation - Johnson Pump SPX AS888 Manual Del Usuario

> english
Important!
AS888 must be installed so it
always can move freely and no
fl oating particles interrupt the
movement.
The electrical wires must be se-
cured preventing them from falling
down onto the switch.
Check AS88 occasionally during
the season ensuring that deposits
or dirt do not interrupt its opera-
tion. Check regularly that the
electrical wires have not been
damanged.
Electrical specifi cation
Max amps
12 V DC – 15 A
24 V DC – 7,5 A
32 V DC – 5,6 A
At heavy loads a separate relay has
to be used. AS888 may only be
used for low voltages (up to 48 V).
Bilge pump control 12 or 24 V
Part No.
12 V – 34-1224
24 V – 34-1225
The bilge pump
control combined
with automatic switch
AS888 is an excellent installation
for your boat. The panel has a
3-position switch for Off, manual
On, and automatic operation –
the automatic feature operates in
combination with AS888.
Integrated fuse holder and opera-
ting light. Fuses included. The
switch is in matt black fi nish.
Size: 76 x 55 mm, 40 mm depth.
6
IB-102_AutoSwitch_and_ctrl-panel_JP-logo.indd 6
All manuals and user guides at all-guides.com

ELECTRICAL INSTALLATION

See fi g. page 15
SPX Johnson Pump submer-
sible bilge pump/Automatic
Switch AS888/ Bilge pump
control
Always install switch AS888 and
bilge pump control or other swit-
ches or fuses between the positive
(+) terminal of the battery and the
positiv (+) connection of the pump
(brown wire, L100 red wire).
The negative (-) connection (black
wire) of the pump to be connected
directly to the negative (-) terminal
of the battery. Fuse size applies to
pump specifi cation.
Electrical connections
All electrical connections must be
placed above the highest water
level. The wire connections should
be sealed with a marine sealant to
prevent wire corrosion. Insulation
or cable sheathings have to be
removed in such a way that they
end well above the highest bilge
water level.
Waste handling/
material recycling
At the products end of life, please
dispose of the product according
to applicable law. Where
applicable, please disassemble
the product and recycle the parts
material.
Original instructions
2014-09-09 15:15:50