Johnson Pump SPX AS888 Manual Del Usuario página 5

Automatic Switch
AS888
Part No. 34-888
The automatic
switch protects
electrically operated
pumps and gives fully
automatic operation.
The switch is made of corrosion
resistant materials.
Max size: Width 75 mm, length
115 mm, height 95 mm.
Installation
Before installing fl oat switch
AS888 form two ≈ 15 cm loops
of the wire and lock them in the
grooves in the base plate. Thus the
automatic fl oat switch can move
with a minimum of resistance.
On a plate surface
Fix with two screws.
Ball at rest, switch in off mode.
Original instructions
IB-102_AutoSwitch_and_ctrl-panel_JP-logo.indd 5
All manuals and user guides at all-guides.com
Water raises switch, ball rolls back,
switch snaps on.
With SPX Johnson Pump
submersible bilge pumps
SPX Johnson Pump submersible
bilge pumps have a T-slot on the
housing or mounting bracket. You
may simply push the switch into
place onto the pump. If you wish, a
small drop of water-proof adhe-
sive will lock the switch on the T.
Screws are recommended for fas-
tening the switch only if your pump
is not equipped with a T-mount.
AS888 should always be instal-
OFF
led in parallel to the keel with the
fl oating body directed aft.
Never install AS888 at a level
lower than the inlet of the bilge
pump.
ON
> english
5
2014-09-09 15:15:50