SEVERIN 8432.0000 Instrucciones De Uso página 8

Hervidor de agua
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
-
in case of any malfunction,
-
aft er use, and also
-
before cleaning the appliance.
When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
Th is appliance is intended for domestic or
similar applications, such as in
-
staff
kitchens,
commercial environments,
-
agricultural areas,
-
hotels,
motels
establishments,
-
bed-and-breakfast guest houses.
In order to comply with safety regulations
and to avoid hazards, repairs of electrical
appliances must be carried out by qualifi ed
personnel, including the replacement
of the power cord. If repairs are needed,
please send the appliance to one of our
customer
service
address can be found in the appendix to
this manual.
Th ermal safety cut-out
Th e preset thermal safety cut-out protects
the heating element from overheating should
the appliance be erroneously switched on
without any water, or if the heating element is
calcifi ed. Once the safety cut-out has switched
off the kettle, it must be allowed to cool down
suffi ciently, or must be descaled before it is
switched on again.
Before using for the fi rst time
For reasons of hygiene, discard the fi rst three
fi lling of water.
Boiling water
Never remove the water container from the
base (or replace it) while the appliance is
switched on.
Remove the water container from its base.
Release and open the lid, and fi ll the
container with water to the desired level,
offi ces
and
other
etc.
and
similar
departments.
Th e
observing the Min. and Max. markings.
Before closing the lid and placing the
container back on its base, ensure that the
appliance has not yet been switched on.
Insert the plug into a suitable wall socket
and press the On/Off switch. Th e indicator
light comes on.
Th e boiling process begins. Aft er reaching
the boiling point, the appliance is
automatically switched off by the integral
steam cut-off device. Th e indicator light
goes out.
If you want to interrupt the boiling
process, set the On/Off switch to its Off
position.
To pour hot water, remove the container
from its base.
To prevent hot steam from being emitted,
ensure that the lid remains closed while
pouring out the water.
Remove the plug from the wall outlet aft er
use.
Do not leave any residual water in the
container.
Power cord wind-up storage
Th e wind-up power cord storage under the
base facilitates limiting the length of the
power cord during use and makes it easy to
store the appliance.
Descaling
Depending on the water quality in your area,
lime deposits may build up on the heating plate.
It is advisable to remove any such deposits at
regular intervals. Any warranty claim will
be null and void if the kettle malfunctions
because of insuffi cient descaling.
A mixture of 0.5 litres of water to two
tablespoons of vinegar essence is suitable.
Pour the descaler in.
Switch the appliance
solution reach boiling point.
Leave it to take eff ect for a short period.
To clean the container aft er descaling,
rinse thoroughly with clean water.
Do not pour descalers down enamel-
8
on and let the
Tabla de contenido
loading

Este manual también es adecuado para:

Wk 3308Wk 3328

Tabla de contenido