Operating Instructions- Use; A.swing-Away Footrests; B.power Elevating & Articulating Legrest; Armrest - Sunrise Medical Quickie Smart Seat Manual De Instrucciones Y Garantía Para El Usuario

18
X. OPERATING INSTRUCTIONS– USE
A. SWING-AWAY FOOTRESTS (Figs. 13 & 14)
1. Installation
a. Place swing-away pivot pin (A) into the locating hole (B) on top of the hanger
mount with the footrest facing outward from frame.
b. Rotate the footrest inward until latch plate (C) locks into place on locking bolt.
2. Removal
a. To remove footrest, press quick-release lever (D).
b. Rotate footrest outward and lift.
3. Height Adjustment
a. Remove both screws (E) from hanger.
b. Reposition footrest height.
c. Retighten both screws into insert.
B. POWER ELEVATING AND ARTICULATING LEGREST (optional) (Fig. 15)
1. Installation
To install ELR/ALR see instructions for Swing-Away Footrest above.
In addition, once ELR/ALR is latched in place:
a. Manually elevate legrest.
b. Align tapered actuator pin (B) with legrest socket (A).
c. Allow legrest to descend as socket and pin couple together.
NOTE– Actuator latch engages automatically during coupling.
2. Removal
a. To remove, pull down lightly on actuator latch release (C) as you manually elevate
legrest, allowing legrest and actuator to decouple.
b. Press quick-release lever on legrest (D).
c. Rotate footrest outward and lift.
C. ARMREST (Fig. 16)
Installation
a. Insert rear arm post into rear receiver (A), insuring that latch engages
b. Open latch on front receiver (B)
c. Insert front arm post into front receiver
d. Close latch to engage
Removal
a. Open latch on front receiver (B)
b. Lift front of armrest
NOTE– Arm can now rotate and be allowed to hang at side of chair
c. To remove, release latch (C) on rear arm post and lift
930473 Rev. B
E n g l i s h
X . O p e r a t i n g I n s t r u c t i o n s – U s e
(not shown)
13
A
C
B
D
14
E
15
A
C
D
B
(not shown)
16
A
B
C