Idiomas disponibles
Idiomas disponibles
E N G L I S H
1. POWER SUPPLY: USB-DC CABLE
The instrument can be
powered by a power bank,
PC, phone charger, etc. with
the USB-DC cable supplied.
Insert the DC jack in the
DC5V socket.
2. MAINS SUPPLY
This instrument can be
powered by a mains adaptor
(not included) with the
following characteristics in output: VDC = 5V; I = 500
mA
(positive central terminal).
WARNING: The transformer, power supply used with the electric
toy shall be regularly examined for damage to the supply cord,
plug, enclosure or other parts, and in the event of damage, it
shall not be used until the damage has been repaired.
• the transformer or power supply is not a toy.
• the toy is not intended for children under 3 years old.
• the toy shall only be used with a transformer for toys or a
power supply for toys.
This toy is only to be connected to equipment
bearing either of the following symbols:
NOTE: Rating plate information was located at bottom
enclosure of the apparatus.
3. BATTERY SUPPLY
Use a screwdriver to open the
battery compartment. Insert 4 x
1.5 V batteries R6/AA (not sup-
plied), ensuring correct polarity
(+/–). Re-fit battery cover.
Replace batteries when the
quality of sound becomes bad. Use alkaline batteri-
es to obtain a longer duration
ATTENTION – BATTERY CARE
• Non-rechargeable batteries are not to be recharged. •
Rechargeable batteries must be removed from the toy before
being charged. • Rechargeable batteries are only to be charged
under adult supervision. • Different types of batteries or new and
old batteries are not to be mixed. • Use only batteries of the same
or equivalent type. • Batteries are to be inserted with correct pola-
rity. • Remove exhausted batteries to prevent leakage. • Do not
short-circuit supply terminals. • Remove batteries during long
periods of non-use.
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items mentioned
here below, please refer to Council Administration office regarding
specialised waste collection centres.
1. DISPOSAL OF BATTERIES: Protect the environment
by disposing of batteries in the special containers pro-
vided for this use.
2. PACKAGING DISPOSAL:
Take the paper, cardboard and corrugated board to the appropriate
waste collection centres. Plastic material must be placed in the
relevant collection containers.
6
.
The symbols indicating the various types of plastic are:
01
02
PET
PE
PVC
Key for the different types of plastic materials:
PET = Polyethylene terephtalate • PE = Polyethylene, code 02 for
PE-HD, 04 for PE-LD • PVC =Polyvinyl chloride • PP = Polypropylene
• PS = Polystyrene, Polystyrene foam • O = Other polymers (ABS,
Laminates, etc.)
3. DISPOSING OF ELECTRICAL APPLIANCES
The wheelie bin symbol with a cross indicates that the
product must not be disposed of in the domestic waste
at the end of its useful life. Instead, it should be taken
to your nearest designated collection point or recycling
facility. Alternatively, check with your retailer and
return the product when buying a replacement, on a one-to-one
basis or as free of charge in case the size is smaller than 25 cm.
Appropriate disposal promotes the recycling of parts and materials,
as well as helping to protect the environment and human health.
Under current legislation, strict penalties are enforced against
those disposing of products illegally. For more information about
the collection of special waste, contact your Local Authority.
SWITCHING ON/OFF
To switch on the instrument move selector
switch the instrument off, move the same selector to
OFF.
DEMOSONGS
This keyboard has 6 demosongs. Press DEMO ALL
to listen to the 5 demosongs in sequence. Press STOP
to interrupt.
VOLUME CONTROL
Adjust volume to desired level by using the Volume
b
buttons
;
to increase, and
SOUNDS
The instrument features 10 sounds. Press keys from 01
to 05 in the SOUNDS SELECT
first 5 sounds; press SOUND SW and then keys from 06
to 10 to select the other 5 sounds. Poliphony: 8 notes.
SUSTAIN
Prolongs the sound of a note when the key is released.
To enable or disable this function, press SUSTAIN
VIBRATO
The vibrato effect is a sound modulation.
To enable or disable this function, press VIBRATO
RHYTHMS
The instrument features 10 rhythms. Press keys from 01
to 05 in the RHYTHMS SELECT
first 5 rhythms; press RHYTHM SW and then keys from
06 to 10 to select the other 5 rhythms.
Press the TEMPO buttons
the rhythm speed. Press STOP
03
05
06
07
PP
PS
O
a
to ON. To
to reduce.
p
section to select the
i
section to select the
c
to reduce (–) or increase (+)
e
to interrupt.
d
,
e
n
.
o
.
