Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INTERCOM AND TRANSFER CALL FUNCTION
Notes before using
1. The parallel phone must be the same model as this unit.
2. When DND function is activated, or anti-dialing is ON or there are no batteries loaded, the two
functions are void.
3. Set the extension code from the menu "SET 9 ECODE" for this unit first.
4. Advise you to parallel with only one similar phone for the better to use your phone.
Intercom call
1. At on-hook state, connect several similar telephones in parallel, and set ECODE for each one.
2. At off-hook state, press SET/STORE/÷ key and input the extension code set in the parallel
phone.
3.
When the telephone in parallel is ringing normal tone, this unit can hear a back tone from
telephone line to indicate the successful calling.
4. Press
key or pick up the handset of the parallel one to answer the calling and perform an
intercom conversation. If the parallel one hasn't answer the call after it rings 8 times, the intercom
call will be cancelled automatically.
Transfer incoming call
1. At on-hook state, connect several similar telephones in parallel, and set ECODE for each one.
When a call is incoming, you can use anyone of them to communicate.
2. If need to transfer to another telephone in parallel, press SET/STORE/÷ firstly at off-hook
state, then input another one's ECODE to transfer calling.
3. When the telephone in parallel is ringing, this unit can hear a back tone from telephone line.
Meanwhile, the parallel telephone can receive the call and this unit can hung-up or not.
4. Press
key or pick up the handset of the parallel one to answer the incoming call transferred
from the telephone line. If haven't answer the call after eight times ringing, the incoming call will be
cut off automatically and stop ringing.
Note: If the parallel phone doesn't get a back tone after dialing extension code, this means the
intercom or transferred call fails, maybe this unit is being DND mode or there are no batteries
loaded. If continuous "di-du" tone is heard on the parallel phone then, this means this unit has turn
on the anti-dialing function.
HOLD ON MUSIC
When talking over handset, press HOLD key to enter the hold mode and the hold music is
sent out. In hold mode
1. Press HOLD key to release hold mode and continue to talk over handset.
2. Or hang up handset, it enters hands-free hold mode.
When talking at hands-free mode, press HOLD key to enter the hold mode and the hold
music is sent out. In hold mode
All manuals and user guides at all-guides.com
24
Tabla de contenido
