Vacation And Moving Care - Kenmore 86482 Manual De Uso Y Cuidado

Vacation and Moving Care

wWARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so can result in death or
electrical shock.
To shut down the ice maker:
1. Unplug ice maker or disconnect power.
2. Remove all ice from the storage bin.
3. Shut off the water supply.
4. Remove the two screws in the lower grille area and the
one screw from the center of the front panel support.
(Open bin door slightly for better access to the screw.) Pull
the bottom forward and then pull down to remove the lower
access panel.
Screw
12
All manuals and user guides at all-guides.com
Screw
Screw
5. Disconnect the inlet and outlet lines to the water valve.
Allow these lines to drain and then reconnect them to the
valve.
Outlet
Inlet
Water
valve
6. Replace the lower access panel and screws.
7. Remove water from the drain lines and drain the water pan
if the unit will be subjected to freezing temperatures during
shutdown.
8. Before using again, clean and sanitize the ice maker and
storage bin.
9. Plug in ice maker or reconnect power.