Basic Functions - Clatronic MC 096 CD Instrucciones De Servicio/Garantía

38496-05-MC 096 CD
List of Parts
GB
1 Door of CD drawer
2 CD drives
3 Headphone connection (3.5 mm jack)
4 Button for opening the door
to the CD drawer (OPEN/CLOSE)
5 Display
• The machine is suitable for placing in a standing position as well as for mounting
on the wall. If it is to be mounted on the wall, suitable rawlplugs and screws
should be used. Care should be taken that the music centre is inserted firmly
into the slots on the back of the machine.
Note: When the music centre is mounted on the wall, it is not possible to insert a
75 Ω plug into the antenna socket of the machine, otherwise the music centre
would be too far away from the wall! In this case please use the antenna cable
supplied.
• If the music centre is placed in a standing position, please ensure that there is
enough clearance to open the door of the CD drawer unhindered. Make sure
that sufficient air can circulate around the music centre in order to avoid
overheating.
• In order to ensure that the machine is in a stable position, pull out the two sup-
ports on the back of the music centre.
• Select a suitable location for the two loudspeakers and then connect the leads with the red and black connectors to the back of the music centre.
• It is also possible to connect other devices to the music centre, such as a cas-
sette recorder, a Mini-Disc player, a video recorder or similar devices. Connect
the machine used for playback to the AUX socket on the back of the machine,
and the recording devices to the LINE-OUT socket. Always observe the manu-
facturer's instructions for the relevant device.
Remote Control
All functions which can be controlled directly on the machine itself can also be con-
trolled with the remote control. The remote control also has some additional func-
tions for the CD player. These are described in more detail in the section "CD
Operation".
• Insert two 1.5 V batteries of type AA into the battery compartment of the remote
control. To do this, open the battery compartment on the back of the remote
control and insert the batteries. Ensure that the poles of the batteries are correct
(see illustration on the bottom of the battery compartment).
• Should you not require the remote control for a prolonged period, remove the
batteries from the device in order to prevent the battery acid from leaking.
14
09.09.2002 12:33 Uhr
All manuals and user guides at all-guides.com
Mounting

Basic Functions

Seite 14
6 Play buttons
7 Operating element flap
8 POWER button
9 Type of operation display
(red = stand-by,
green = machine on)