Troubleshooting - Vornado ELEMENT A Manual Del Usuario

TROUBLESHOOTING

PROBLEM
Unit fails to power on.
Unit makes bubbling
or gurgling sound.
Unit is not producing
desired amount
of humidity.
22 English
POSSIBLE CAUSE AND SOLUTION
Unit is not plugged in. Plug power cord into electrical outlet.
Household circuit breaker/ground fault circuit interrupter
has tripped or blown fuse. Reset circuit breaker/ground fault
circuit interrupter, or replace fuse. For assistance, contact
licensed electrician.
Unit is damaged or in need of repair. Cease usage and unplug.
Contact Consumer Service for assistance.
Ensure the magnetic base cover is securely in place to ensure
electrical connection between power head and base.
If for any reason Element should overheat, as a safety precaution,
the power will shut off and power button will illuminate orange.
Once cooled (3-5 minutes), you may power it back on.
This is normal. Water is being dispensed into base. You may
periodically see bubbles in the tank, which is normal. This is the
water tank feeding water from the reservoir to the boil chamber.
Water level in tank is empty or too low. Refill tank with clean, cool
tap water.
Unit has reached its set point. When set humidity level is reached,
the fan and heat element will turn off until humidity level in room
drops below humidity set point.