Vornado ELEMENT A Manual Del Usuario página 21

CLEANING THE BASE
1. Turn humidifier off and unplug.
Note: Be sure you are near a sink or an area that will not be damaged by water. Excess water will flush
from heat element cover when disassembling.
WARNING: To avoid overfilling the base, remove the water tank before the power head to
avoid water displacement.
2. Disassemble humidifier:
– Remove water tank first.
– Next remove water tank support rod by pulling the rod outward.
– Then remove power head by turning power head counterclockwise to release from base and
remove the magnetic base cover and all silicone parts. WARNING: Do not grasp outlet grill to
remove power head, it may be hot.
3. Clean base and silicone parts with warm water and a mild detergent. Rinse and dry.
4. Reassemble humidifier:
– Ensure the magnetic base cover and silicone parts are back in place.
WARNING: Do not run humidifier without the silicone parts.
– Turn power head clockwise to re-attach to base:
- First align arrows as shown on power head and magnetic base (A).
- Next turn power head clockwise until arrows are aligned as shown
in Figure (B).
A
– Replace water tank support rod then water tank.
B
A
B
19
English