INSTRUCTION MANUAL
Age: 2 - 5 years
• Please read these instructions carefully before using the toy and keep for future reference.
• Requires three (3) 1.5 Volt LR44 batteries (supplied). The batteries present in this product cannot be replaced.
WARNINGS:
WARNING!
For your child's safety:
• Before using the product, remove and dispose of plastic bags and all other packaging and keep out of reach of children.
Choking hazard.
• Regularly inspect the product for signs of wear and damage. If any part of the product is damaged, do not use and keep
out of the reach of children.
• Use the toy under the continuous supervision of an adult.
• Do not use this toy in any way not illustrated in the manual.
• You can inflate the toy by mouth or with a hand- or foot-operated pump. Do not use high-pressure pumps or compres-
sors etc. WARNING! Do not over-inflate the product.
• The toy must only be used on flat, level surfaces.
• Do not use the toy on roads, access roads, or slopes. Make sure that the toy is used in areas free from obstacles and away
from places that could be dangerous (such as swimming pools, canals, lakes, stairs, etc.)
• WARNING! This product is neither a nautical toy nor a floating device (such as a lifejacket): do not use in
water.
• Keep the product far from heat sources to prevent the risk of overheating and explosion.
• If the product has remained for a long time in direct sunlight, take it to a cool place to cool down.
• Do not use this toy in any way not illustrated in the manual.
• WARNING! After opening the pack and before using this product, ventilate for at least 24 hours.
• WARNING! Before inflating the product, fill the base with about 4000 ml of water.
• WARNING! This product contains non-replaceable batteries.
• WARNING! When deflating the product, first release the air through the valve and then, after placing the
product over a sink, empty the water present in the base.
• WARNING! Keep away from sharp objects.
• When using the product, maintain a minimum radius of 2.5 m from any obstacles or sharp objects.
HOW TO PREPARE AND USE THE PRODUCT
• Before inflating, fill the base with about 4000 ml of water. Use the valve located on the base of the product to fill it with
water (FIG. 1).
• After filling the base with the amount of water specified, close the valve and push it inward until it is level with the
surface of the product.
• To inflate the product, blow air through the valve at the side of the Panda (FIG. 2) and keep inflating until there are no
creases on the product. Do not over-inflate the product.
• After inflating, close the valve and push it inward until it is level with the surface of the product.
• To activate the sounds, press the O/I button located on the glove of the panda (FIG. 3).
• If the product remains inactive for 10 minutes the sounds will be deactivated. To reactivate, press the button shown in FIG. 3.
CARE & MAINTENANCE
• Use a soft cloth slightly dampened with water to clean the toy.
• Protect the toy and the battery compartment from water, heat, dust and sand.
• Replace the water in base from time to time to avoid stagnation.
HOW TO REMOVE THE SOUND MODULE AND BATTERIES AT THE END OF THE PRODUCT'S LIFE
At the end of product life, the sound module must be removed and disposed using a pair of scissors and proceeding as
follows:
• Cut the plastic part as indicated in the image (Fig. 4).
• Remove the sound module (Fig. 5).
• WARNING: once the sound module has been removed it must be kept out of the reach of children.
PANDA BOXING COACH
4