Color Control Menu; Color Mode; White Balance; Mode Select Menu - Sharp IT-23M1U Manual De Funcionamiento

COLOR CONTROL menu

Item

COLOR MODE

WHITE BALANCE

RESET
Note:
- "WHITE BALANCE" will be automatically set to "STD" when "COLOR MODE" is set to "sRGB" or
"VIVID".

MODE SELECT menu

Item

VIEW MODE

480 LINES

768 LINES

SOUND

SCALING

LANGUAGE

RESET
IT-23M1U_gb_02.P65
All manuals and user guides at all-guides.com
Using the menus in PC mode
Description
Selects the color tone.
- STD ................ Displays images using the original color tone of the LCD
monitor.
- sRGB .............. sRGB is an international standard for color representation
defined by the IEC (International Electrotechnical Commission).
Colors are converted by taking into account the liquid crystal's
characteristics and thereby represent color tone close to the
original image.
- VIVID .............. Displays images in vivid primary colors.
Adjusts the color temperature.
Set "WHITE BALANCE" to "STD" if you want to display all gradations.
- COOL2 ........... Color tone bluer than standard.
- COOL1 ........... Color tone slightly bluer than standard.
- STD ................ Standard setting for color tone.
- WARM1 .......... Color tone slightly redder than standard.
- WARM2 .......... Color tone redder than standard.
- USER ............. Allows you to individually adjust red, green, and blue contrast.
Resets adjustment values for this menu to their original factory settings.
Description
Selects the screen size.
- NORMAL ........ Displays the image without changing its aspect ratio.
When the image's resolution is lower than 1024 x 768, the
image is expanded.
- FULL ............... Expands the image so that it fills the screen. (The aspect ratio
may change.)
You can also set this item directly using the remote control, instead of the
adjustment screen. (See page E53)
Specifies the horizontal resolution of a 480-line screen. (For analog signals)
- 640 ................. 640 x 480 dot mode
- 848 ................. 848 x 480 dot mode
Specifies the horizontal resolution of a 768-line screen. (For analog signals)
- 1024 ............... 1024 x 768 dot mode
- 1280 ............... 1280 x 768 dot mode
- 1360 ............... 1360 x 768 dot mode
Selects the audio to listen to while displaying the computer screen.
When the PIP/SPLIT window is displayed, the audio set by "SOUND" in the
MULTI SCREEN menu takes precedence. (See page E36.)
When "STATUS" in the V-CHIP BLOCK menu is "ON" (see page E47),
TV/AV-IN SOUND is not available in PC mode.
Adjusts the image to optimum sharpness when it is enlarged.
Selects the language (English, French or Spanish) on the screen.
(See page E28.)
Resets adjustment values for this menu to their original factory settings.
E35
35 2004/08/20, 10:43