Operation - Cameo FLAT SPAR Manual De Usuario

11
CONTROL BUTTONS
MODE: Press the MODE button to move up one level in the menu structure.
ENTER: Confirms programme selection and value changes.
UP and DOWN: Selection of the main menu items, programmes, change settings, such as programme speed and DMX address.
12
MIC SENSITIVITY
Control dial for setting the microphone sensitivity in standalone music-control mode, control via IR remote control and in DMX sound-control mode. Turn
anti-clockwise to reduce sensitivity and clockwise to increase sensitivity.
13
HOUSING FAN
In order to avoid overheating of the device, ensure that the fan is not obstructed and that air can circulate freely.
14
SECURING LUG
Eyelet for safety rope. Overhead installation must only be carried out by qualified personnel. The spotlight must be fitted with a suitable safety
rope to ensure that it does not fall down.

OPERATION

A few seconds after connecting to the mains, the effects spotlight is ready for operation and the previously selected operating mode is
activated. During the start-up process, the software version is displayed briefly (Vx.xx).
To access the top level of the menu structure, press the MODE button several times if necessary. The display now shows one of the main
menu items, Addr (DMX address), chAn (DMX modes), ModE (stand-alone modes) Set (system settings) or information (displays system
software version). To select one of the main menu items, use the UP and DOWN keys and confirm with ENTER.
ACTIVATING DMX-CONTROL, CONFIGURING DMX START-ADDRESS (Addr)
As previously described, use the UP and DOWN buttons to select the menu item Addr and confirm with ENTER. The currently configured DMX
start address will now be displayed. Using the UP and DOWN buttons, configure the desired DMX start address and press ENTER to confirm.
-> ENTER -> UP/DOWN
SETTING DMX MODE (chAn)
As previously described, use the UP and DOWN buttons to select the menu item chAn and confirm with ENTER. The currently configured
DMX mode is now displayed (3ch1, 3ch2, 07ch,12ch, 13ch). Using the UP and DOWN buttons, configure the desired DMX mode and
press ENTER to confirm. Tables with the channel assignment of the different DMX modes can be found in these instructions under DMX
CONTROL.
UP/DOWN
-> ENTER ->
STADALONE MODES (ModE)
As previously described, use the UP and DOWN buttons to select the menu item ModE and confirm with ENTER. Use the UP AND DOWN buttons
to select the desired stand-alone mode and confirm with ENTER (Auto = programmes with automatic control, Soun = music-controlled
programmes, SLAV = master/slave mode, StAt = static mode to set a 'scene').
UP/DOWN
-> ENTER ->
- -> ENTER
/ /
/ /
/ /
/ -> ENTER
-> ENTER
7