Technical Data - Cameo FLAT SPAR Manual De Usuario

Pin Assignment
DMX cable with 3-pin XLR connectors:
Shield
1
3
2
DMX TERMINATORS (TERMINATING RESISTORS)
To prevent system errors, the last device in a DMX chain needs to be equipped with a terminating resistor (120 ohm, 1/4 Watt).
3-pin XLR connector with a terminating resistor: K3DMXT3
5-pin XLR connector with a terminating resistor: K3DMXT5
Pin Assignment
3-pin XLR connector:
1
3
2
DMX ADAPTER
The combination of DMX devices with 3-pin connectors and DMX devices with 5-pin connectors in a DMX chain is possible with suitable
adapters.
Pin Assignment
DMX Adapter 5-pin XLR male to 3-pin XLR female: K3DGF0020
Pins 4 and 5 are not used.
Pin Assignment
DMX Adapter 3-pin XLR male to 5-pin XLR female: K3DHM0020
Pins 4 and 5 are not used.

TECHNICAL DATA

Product number:
Product type:
Type:
Colour spectrum centre LEDs:
Number of centre LEDs:
LED type centre LEDs:
Colour spectrum SMD LED ring:
Number of SMD LED rings:
LED type SMD LED ring:
DMX input:
DMX output:
DMX mode:
DMX functions:
Standalone functions:
Control:
Operating controls:
Display elements:
12
1
3
2
CLFLATSTAR
LED effects
2-in-1 effect spotlight
RGBWA+UV
3
12W 6-in-1
RGB
27
0.5W Tri
3-pin male XLR
3-pin female XLR
3-Channel 1, 3-channel 2 , 7-channel, 12-channel, 13-channel
dimmer, auto programmes, pattern, strobe, colour macro, RGBWA+UV, SMD LED
ring
auto programmes, sound programmes, master/slave, static mode
DMX512, IR remote control
Mode, Enter, Up, Down, IR Remote Control, Mic Sensitivity
4-digit LED display
DMX cable with 5-pin XLR connectors (pin 4 and 5 are not used):
5
4
3 3
2
1
Shield
5-pin XLR connector:
5
4
3
2
1
5
4
2
1