Safety instructions
WARNING
The appliance is not suitable for vacuuming
dust which endangers health.
WARNING
Protect the unit from rain. Do not store out-
side.
ATTENTION
This unit is only to be used indoors.
ATTENTION
Risk of crushing! Wear gloves when remov-
ing or fitting the suction head, the filter unit
or the collection container.
Switch off the appliance after complet-
ing work and pull the mains plug.
Never vacuum without a filter or a dam-
aged a filter, otherwise the device can
get damaged.
In Emergency
In case of emergency (e.g. when suck-
ing in combustible materials, in case of
a short-circuit or some other electrical
defect), switch off the appliance and
pull the mains plug.
Electrical connection
The appliance may only be connected to an
electric supply that has been installed by an
electrician in accordance with IEC 60364.
For connection values, see technical data
and type plate.
You are not allowed to use an extension ca-
ble.
DANGER
Risk of electric shock. Electrical connecting
cables must not be damaged through being
driven over, crushed, pulled or the like. Pro-
tect the power cord from heat, oil, and
sharp edges.
Check the mains cables of the machine
each time before using the machine to see
that it is not damaged. Never operate a ma-
chine with damaged cables. Get the dam-
aged cables replaced by an electrician.
10
Device elements
Illustration on the inside of the front
cover
1 ON/OFF switch
2 Push handle
3 Suction hose connection
4 Lever for lowering the collection con-
tainer
5 Collecting tank
6 Power cord
7 Lock suction head
8 Pocket filter
9 Handle filter cleaning
10 Accessories compartment
11 Lever for lowering the collection con-
tainer
12 Chassis
13 Guiding rolls with fixed position brake
Illustration on the inside of the front
cover
Bring the appliance to working position
- secure it, if required, with parking
brakes.
Ensure that the suction head has been
fitted properly.
Illustration
Insert the suction hose into the suction
hose connection.
Attach the desired accessories to the
suction hose.
Illustration on the inside of the front
cover
Insert the mains plug into the socket.
Illustration
Turning on the Appliance
Note: The switch has several switching
stages:
0
Device is switched off
1
Motor 1 switched on
2
Motor 1 and 2 switched on
Always operate the device in stage 2.
EN
– 2
Start up
Operation