Kärcher K 3.540 Manual De Usuario página 11

Detergents can only be applied at
low pressure setting (Mix).
STEP 1:

Install the Vario Power Spray Wand.
Set the spray wand to the low pres-
sure setting (Mix).
STEP 2:

Fill the detergent tank with Karcher
detergent and position the tank into
its storage area. Insert the suction
tube with filter into the tank and close
it with the cap.
STEP 3:

Adjust the suction volume of the de-
tergent solution by means of the
dosage regulator for detergents.
All manuals and user guides at all-guides.com
WORKING WITH DETERGENTS
STEP 4:

Turn on the pressure washer (I). Pull
trigger to operate unit. Liquid deter-
gent is drawn into the unit and mixed
with water. Apply detergent to work
area. Do not allow detergent to dry
on surface.
STEP 5:

To rinse, move the VPS out of „Mix"
position and pull trigger to operate
unit.
STEP 6:

Cleaning up: Always draw fresh wa-
ter through the detergent tank or si-
phon tube when done to flush any
remaining detergents from the injec-
tion system.
For best results see Cleaning Tips
for specific information on how to
clean different surfaces.
Always Use Kärcher
Best Results
Kärcher biodegradable detergents are
®
specially formulated to protect the envi-
ronment and your pressure washer. The
special formula won't clog the suction
tube filter and will protect the internal
parts of the pressure washer for a long-
er life. For Kärcher
your retailer or visit our website:
www.buykarcher.com
Detergent for
®
Detergents, check
®
11
English