F
1
2
TO REMOTE
3
PROGRAM
TO ADD, REPROGRAM, OR CHANGE A REMOTE
F
CONTROL/KEYLESS ENTRY PIN
1 Press the navigation button below "MENU" to view the
Features menu.
2 Use the navigation buttons to scroll to "PROGRAM" and
press the navigation button under
3 Select "REMOTE" or "KEYPAD" to program from the program
menu. Press
to continue.
4a Press the button on the remote control that you wish to operate
your garage door.
4b Enter a 4-digit personal identification number (PIN) of your
choice on the keyless entry keypad. Then press the ENTER
button.
The garage door opener lights will flash (or two clicks will be
heard) when the code has been programmed. Repeat the steps
above for programming additional remote controls or keyless entry
devices. If programming is unsuccessful, refer to the remote
control instructions.
G
MENU NAVIGATION
The features on the door control can be programmed through a
series of menus on the screen and the navigation buttons. Refer to
the descriptions below.
SCREEN
The main screen displays the time, temperature, and current battery
charge (if applicable) (Figure 1).
4a
4b
?
WI-FI SETUP
NOTE: If Wi-Fi option is not listed, your garage door opener is not
Wi-Fi compatible.
Select "MENU". Select "PROGRAM". Select "Wi-Fi SETUP". When
"ON" is displayed, you may begin Wi-Fi setup.
FEATURES
to continue.
Press the navigation button below "MENU" to view the Features
menu (Figure 2).
CLOCK SETUP: Set the time, choose 12 or 24 hour clock and
show/hide clock.
TTC SETTINGS: Set the TImer-to-Close feature off/on and set the
time interval before door closes. NOTE: DO NOT enable TTC if
operating a one-piece door. TTC is to be used ONLY with sectional
doors.
LOCK: Enable/disable lock.
PROGRAM: Add remote controls, MyQ
button to control your garage door opener lights, a keyless entry,
and enable Wi-Fi. NOTE: If Wi-Fi option is not listed, your garage
door opener is not Wi-Fi compatible.
SETTINGS
Press the navigation button below the down arrow till you see
TEMPERATURE to view the Settings menu (Figure 3).
TEMPERATURE: Display the temperature in Fahrenheit or Celsius
and show/hide the temperature.
LANGUAGE: Select a language (English, French, or Spanish).
LIGHT SETTINGS: Set duration for garage door opener light to stay
on after operation, selectable range of 1-1/2 to 4-1/2 minutes. Turn
the Motion sensor off/on, and turn the entry light feature off/on.
CONTRAST: Adjust the contrast of the screen.
?
?
?
PIN
®
devices, an extra remote
4
G
FIGURE 1
FIGURE 2
Navigation Buttons
FIGURE 3
FIGURE 4
SERVICE
Press and hold the LIGHT button, then press the second navigation
button to view the Service menu (Figure 4).
SOFTWARE REVISION: Displays software version information.
CYCLE COUNT ON/OFF: Turn the Maintenance Alert (MAS) on/off.
TRANSMITTERS: Displays the number of remote controls, MyQ
devices, door controls and keyless entries currently programed to
operate the garage door opener.
DISPLAY ERROR: Displays any errors that have occurred.
WARRANTY
ONE YEAR LIMITED WARRANTY
The Chamberlain Group, Inc. warrants to the first consumer
purchaser of this product that it is free from defect in materials
and/or workmanship for a period of 1 year from the date of
purchase.
NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifi cations of this
receiver and/or transmitter are prohibited, except for changing the code setting or replacing the
battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards for Home or offi ce use. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
* Your garage door opener must be Wi-Fi compatible, visit
wifihelp.chamberlain.com for more details.
®
Wi-Fi
is a registered trademark of Wi-Fi Alliance
®
