ATTACHING THE SURVEILLANCE KIT
1.
Turn the radio off. Attaching the surveillance kit while
the radio is on may cause the radio to transmit
constantly, locking up your radio system. If this should
happen, turn off the radio. The radio can then be
turned back on, restoring normal operations.
2.
Remove any dust caps or covers from the radio
accessory connector.
3.
Attach the surveillance kit to the radio accessory
connector.
To change the surveillance component parts refer to the
exploded view (see Figure 1) and proceed as follows:
a.To change eartips on an acoustic tube detach the
eartip from the elbow. Position the replacement
eartip over the elbow and press firmly on the eartip
secure.
b.To change a noise attenuating kit on an acoustic tube
assembly or to change eartubes detached to the
eartip or eartube piece from the elbow. Position the
tube end of a new foam eartube piece over the
elbow and press firmly on the eartube to secure.
c.To replace an acoustic tube assembly, simply grab
the quick disconnect and turn a 1/4 turn to the left.
Gently pull out the acoustic tube. Plug new tube into
the adapter and turn clockwise 90° to secure.
d.To change earphones, gently pry the acoustic tube
adapter away from the earphone by sliding a thin
object between the adapter and the earphone. Work
5