Commissioning And Operation; Description Of The Appliance - Kärcher VC 6100 Manual De Instrucciones

Do not use worn out appliance; first put it
out of use; then arrange for its proper
disposal as scrap.

Commissioning and operation

Please take notice! Should, while turning
the appliance on, the mains furse tripper
shut off, possibly, other electrical applianc-
es are connected and are operating on the
same electric circuit. Should this be the
case, put the appliance in its lowest power
stage, before turning the appliance on. After-
wards you may select a higher power stage.
Refer to chapter "Technical data" for power
fuse protection.
Important notice! The appliance will shut-
down automatically, if there is danger of
overheating. Turn the appliance off and pull
the power plug. Make sure, that the nozzle,
the suction pipe or the tube is not clogged,
failing all the above the filter must be
changed. After the elimination of the interfer-
ence let the appliance cool down for a mini-
mum of 1 hour, before using it again.

Description of the Appliance

Please unfold the pages with the dia-
grams!
1 Power cord with plug
2 Push button take-up cable
3 On/Off button
4 Suction control
5 Suction hose
6 Handle
(A) Manual vaccum slide
7 Teleskopic suction pipe *
8 Adjustable teleskopic suction pipe *
9 Floor nozzle
10 Cover attachment housing
11 Attachment housing QuickClick:
All manuals and user guides at all-guides.com
12 Change filter indicator
13 Shutter lever, lid filter bag/ motor protec-
14 Motor protection filter
15 Filter bag holder
16 Cover HEPA filter
17 HEPA-filter
18 Carrying handle
* depending on model
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
includes upholstery nozzle, telescopic
gap nozzle and a furniture brush
tion filter
Start up
Lock the suction hose neck in the suction
opening.
To take off, push both lock devices to-
gether and pull the tube.
Connect handle and suction tube and in-
sert.
Connect the floor nozzle and telescopic
suction pipe and insert.
Use the ajustment in order to adjust the
telescopic suction pipe to the lengh you
wish.
When you stop or you take a short break,
hang the floor nozzle into the parking po-
sition on the back of the appliance, and
push it into the resting position.
To remove, press handle backwards in
the direction of the appliance. The floor
nozzle is thus unlocked from the parking
holder and can be removed upwards.
Hold the power cord at the plug and pull
it out. Insert the mains plug into a socket.
Turn on/off the appliance.
7
English