Idiomas disponibles
Idiomas disponibles
CEBORA S.p.A.
2
SYSTEM DESCRIPTION.
2.1
Welding System Composition.
The Cebora SOUND MIG ROBOT SPEED
STAR Welding System is a multi-process system
for synergic MIG/MAG welding, developed for
use in combination with a welding
Robot arm on automated welding systems.
GB
1 Power
Source
connection.
2 Power Source - Wire feeder extension.
3 Power Source - Robot Control cabinet cable
connection.
4 Power Source - Robot Interface or Robot
Control CANopen cable.
5 Robot Control cabinet.
6 Welding wire spool holder.
7 Torch.
8 Wire Feeder unit.
10 Welding wire sheath.
21 Power Source.
22 Cooling Unit.
24 Power Source Control Panel.
25 Robot Interface.
26 Standard cable corresponding to the field bus
used.
NOTE: If the Robot Control (fig. 2) has the
CANopen communication line type, the
interface (25) and the cable (26) are not
necessary.
3.300.354
-
Control
Panel
cable
It comprises a Power Source, equipped with
Cooling Unit a Wire Feeder a Control Panel and,
if necessary, a Robot Interface (see fig. 2).
fig. 2
The Power Source (21) is equipped with
the insulated CAN-2 CANbus line
purposely realized for direct connecting
Power Sources and Robot Control.
In such case the CANopen cable (4) must
be requested separately to Cebora.
2.2
This Instructions Manual.
This Instructions Manual refers to the Power
Source, equipped with Cooling Unit and has been
prepared to educate the personnel assigned to
install, operate and maintain the Welding System.
It must be stored carefully in a place familiar to
users and consulted whenever there are doubts.
It must be kept for the entire operative life-span
of the machine and used to order spare parts.
The Cebora SOUND MIG ROBOT SPEED
STAR system has three models of Power Source
to choose, one in alternative to the other,
according to the system requirements and a
Cooling Unit (GRV12, art. 1683) unique for all
Power Sources:
14
15-04-2013
