Charging Procedure - Worx WG787 Manual De Instrucciones

Cortacésped de bateria
Ocultar thumbs Ver también para WG787:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

SYMBOLS
Read the operator's manual
Safety alert
Blade continues to rotate after
the machine is switched off. Wait
until all machine components
have completely stopped before
touching them.
Do not expose to rain or water
Do not burn
Do not dispose of batteries. Return
exhausted batteries to your local
collection or recycling point.
Contains Pb battery. Battery must
be recycled or disposed of properly.
Slip on slope
CPSC Danger label.
Severing of toes or fingers-Rotary
mower blade.
Keep bystanders/children away
Thrown objects from mower deck.
3-in-1 Cordless Lawn Mower
All manuals and user guides at all-guides.com
CHARGER SAFETY RULES
1. Plug charger directly into an electrical
2.
3. Do not service mower with charger or
4. Do not operate a damaged charger.
5. Always charge the mower in a dry area
6. Keep the mower and charger away from

CHARGING PROCEDURE

(See A1,A2,A3)
1. Charging can be carried out either with the
2. Plug the charger connector into the
3. Insert the plug of the charger into the wall
4. Press the button (a) on the charger until
5. The red light (17) will turn off and the
outlet. Do NoT aBUSE ThE CorD.
Never carry charger by cord. Do not
disconnect the charger from the outlet or
mower by pulling it by the cord.
CaUTioN: To reduce the risk of fire,
electrical shock, or personal injury
do not attempt to use this charger with any
other product.
Likewise, do not attempt to charge the
battery with any other charger.
safety key installed.
Replace damaged cords or charger
immediately by calling the WORX Helpline
at 1-866-354-9679.
protected from the weather. Do not expose
the mower or charger to rain. Do not
charge in wet locations. Do not charge
mower when temperature is above 104°F
(40°C) or below 41°F (5°C).
water, heat sources, (Such as radiators,
heaters, stoves...etc.) flames, or chemicals.
Be careful not to damage the charger cord,
by keeping cord away from sharp edges.
battery FITTED (See A1) or REMOVED from
the machine (See A2).
receptacle on the handle bar controls. (See
A1), or plug the charger connector into the
receptacle on the battery. (See A2)
receptacle.
the red light (17) becomes lit, indicating
the charger has power and the battery is
being charged. (See A3) The light may take
up to 30 seconds to become lit.
green light (16) will come on when
13
13
EN
Tabla de contenido
loading

Tabla de contenido