Charging Procedure - Worx WG782 Manual Del Usuario

SYMBOLS
Safety alert
Read the operator's manual
Blade continues to rotate after
the machine is switched off. Wait
until all machine components
have completely stopped before
touching them.
Do not expose to rain or water
Do not burn
Do not dispose of batteries. Return
exhausted batteries to your local
collection or recycling point.
Contains Pb battery. Battery must
be recycled or disposed of properly.
Slip on slope
Severing of toes or fingers-Rotary
mower blade
Keep bystanders/children away
Thrown objects from mower deck
CPSC Danger label
KEEP HANDS AND FEET AWAY
GARDER MAINS ET PIEDS À DI S TANCE
24V 14" Cordless lawn mower
CHARGER SAFETY RULES
1. Plug charger directly into an electrical
outlet. DO NOT ABUSE THE CORD. Never
carry charger by cord. Do not disconnect
the charger from the outlet or mower by
pulling it by the cord.
CaUTioN: To reduce the risk of fire,
2.
electrical shock, or personal injury
do not attempt to use this charger with any
other product. Likewise, do not attempt to
charge the battery with any other charger.
3. Do not service mower with charger or
safety key installed.
4. Do not operate a damaged charger.
Replace damaged cords or charger
immediately by calling the WORX Helpline
at 1-866-354-9679.
5. Always charge the mower in a dry area
protected from the weather. Do not expose
the mower or charger to rain. Do not
charge in wet locations. Do not charge
mower when temperature is above 104°F
(40°C) or below 41°F (5°C).
6. Keep the mower and charger away from
water, heat sources, (Such as radiators,
heaters, stoves...etc.) flames, or chemicals.
Be careful not to damage the charger cord,
by keeping cord away from sharp edges.

CHARGING PROCEDURE

(See A1,A2)
1. Charging can be carried out either with the
battery FITTED (See A1) or REMOVED from
the machine (See A2).
2. Plug the charger connector into the
receptacle on the handle bar controls. (See
A1), or plug the charger connector into the
receptacle on the battery. (See A2)
3. Insert the plug of the charger into the wall
receptacle.
4. Press the button (a) on the charger until
the red light (19) becomes lit, indicating the
charger has power and the battery is being
charged. (See A3) The light may take up to
30 seconds to become lit.
5. The red light (19) will turn off and the green
light (18) will become lit when charging
is complete (approximately 5-7 hours to
13 13
EN