Cleaning And Maintenance - Steinberg Systems SBS-MD-12 Manual De Instrucciones

4. Pass the metal sample to be detected over the device. The metal object is best kept
5-7 cm above the search coil. When the device detects the sample, it beeps and the
display will show an arrow under the appropriate target icon and the approximate
depth.
Note! If a coin is used for testing, the device will detect it better if it is placed with its
flat side parallel to the device.
FACTORS AFFECTING DETECTION
1. The angle of the buried target.
2. Target's depth.
3. Target's oxidation level.
4. Target's size.
5. Electromagnetic and electrical disturbance around the target.
6. Metal digging tools located in the device operation area.

3.4. Cleaning and maintenance

a) Use only non-corrosive cleaners to clean the surface.
b) Store the unit in a dry, cool place, free from moisture and direct exposure to
sunlight.
c) Do not leave the battery in the device if it will not be used for a longer period
of time.
d) Use a soft, damp cloth for cleaning.
e) Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or a metal
spatula) because they may damage the surface material of the appliance.
f) Do not clean the device with an acidic substance, agents of medical purposes,
thinners, fuel, oils or other chemical substances because it may damage the
device.
g) Before starting the cleaning 59roces, it is necessary to turn the device off and
to remove the batteries.
SAFE REMOVAL OF BATTERIES AND RECHARGEABLE BATTERIES
1.5V AAA, 9V batteries are installed in the devices.
Remove used batteries from the device using the same procedure by which you
installed them.
Recycle batteries with the appropriate organisation or company.
DISPOSING OF USED DEVICES
Do not dispose of this device in municipal waste systems. Hand it over to an
electric and electrical device recycling and collection point. Check the symbol on