General Safety - Beko HCA63640B Manual Del Usuario

Important nstruct ons for safety and
1
env ronment
This section contains safety in-
structions that will help protect
from risk of personal injury or prop-
erty damage. All warranties will be-
come void if you do not follow these
instructions.

1.1 General safety

Always have the installation and
•
repairing procedures carried out
by the Authorised Service Agent.
Manufacturer shall not be held
responsible for damages arising
from procedures carried out by
unauthorised persons.
This appliance is not intended for
•
use by persons (including chil-
dren) with reduced physical, sen-
sory or mental capabilities, or lack
of experience and knowledge.
Children should be supervised to
ensure that they do not play with
the appliance.
1.1.1 Electr cal safety
Disconnect the product from the
•
mains during installation, main-
tenance, cleaning and repairing
procedures.
20 / EN
All manuals and user guides at all-guides.com
If the power cable is damaged, it
•
must be replaced by the manufac-
turer, after sales service or a sim-
ilarly qualified person (preferably
an electrician) or someone desig-
nated by the importer in order to
avoid possible risks.
Operating voltage is 220 to 240
•
volts.
If the appliance has a failure, it
•
should not be operated unless
it is repaired by the Authorised
Service Agent. There is the risk of
electric shock!
Do not route power cable close to
•
hobs. Otherwise power cable may
cause fire since it melts down eas-
ily.
Never plug the hood before instal-
•
lation is completed.
In order to obtain the best perfor-
•
mance, external conductor must
not be longer than 4 m. It must not
contain more than 2 perpendicu-
lar (90°) angles and its diameter
must be min. ø120 mm.
Disconnect the appliance before
•
any intervention to the internal
parts of the appliance.
Hood / User Manual