Preparations At The Workplace - Hilti SR 30 Manual De Instrucciones

Weight
Stroke rate
Stroke length
Blade holder
5

Preparations at the workplace

CAUTION
Risk of injury! Inadvertent starting of the product.
▶ Unplug the supply cord before making adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1 Installing the scaffold hook (accessory)
▶ Install the scaffold hook.
5.2 Removing the saw blade
1. Push the locking lever up as far as it will go and hold it in this position.
2. Pull the blade forward out of the blade holder.
3. Allow the locking lever to return to its original position.
5.3 Replacing the contact shoe
1. Remove the saw blade. → page 7
2. Press the unlocking/locking button of the contact shoe.
3. Pull the contact shoe out.
4. Press the unlocking/locking button of the contact shoe.
5. Insert the lightly greased contact shoe into the guide to the desired position.
The contact shoe can be used in three positions.
6. Check that the contact shoe has engaged.
7. Insert the saw blade. → page 7
5.4 Installing the dust removal adapter (accessory)
1. Remove the contact shoe.
2. Push the dust removal adapter on to the guide rail of the contact shoe.
3. Insert the lightly greased contact shoe fully into the guide.
5.5 Inserting the saw blade
Use only saw blades with a 1/2" connection end.
1. Check that the connection end of the accessory tool is clean and lightly greased. Clean and grease the
connection end if necessary.
2. Push the locking lever up as far as it will go and hold it in this position.
3. Push the saw blade into the blade holder from the front end of the tool.
4. Allow the locking lever to return to its original position.
5. Grip and pull the saw blade to check that it is locked in position.
*2243130*
5
2
3
6
2243130
SR 30
4.8 kg
(10.6 lb)
2,650 /min
32 mm
(1.3 in)
1/2 in
4
English 7