Important Safeguards; Short Cord Instructions - DeLonghi DBM8150 Instrucciones Para El Uso

I M P O RTA N T S A F E G U A R D S
When using electrical appliances, basic safety precautions should always be followed, to reduce the risk of fire,
electrical shock and/or personal injury.
READ ALL INSTRUCTIONS CAREFULLY.
• To protect against electrical shock, do not place the cord or the blender's base in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use and before cleaning. Turn the unit off before putting on or taking off parts, and before
cleaning the appliance. Never put hands into the glass jar, or handle the blade assembly with appliance plugged in.
• Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any
manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment.
• The use of accessory attachments not recommended by the appliance manufacturer.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Always plug cord into the wall outlet before turning on any controls. To disconnect turn power OFF by pushing the
button on the speed control, then remove plug from wall outlet.
• When blending hot liquids, remove the ingredient cap from the lid.
• Do not use this appliance for other than intended use.
• Avoid contact with moving parts.
• Keep hands and utensils out of jar while blending, to reduce the risk of severe injury to persons or damage to blender itself.
A rubber or plastic spatula may be used but must be used only when the blender is turned OFF.
• When blender is on, do not touch blade assembly, interfere with blade movement, or remove the lid from the jar.
Accidentally touching a speed button may activate the blender.
BLADES ARE SHARP. HANDLE CAREFULLY.
• Never leave your blender unattended while running.
• For safety reasons, the blending of very hot liquids is not reccomended.
• Allow hot liquids to cool before blending.
• When removing the glass jar from the power unit, wait until the blades have completely stopped.
• NEVER run the blender when it is empty.
• Only operate the blender with the lid in place.
• The use of accessory attachments not recommended by the appliance manufacturer can cause electric shocks.
• The manufacturer cannot be held responsible for damage caused by inappropriate, incorrect or irresponsible use.
• Never touch the appliance with wet hands. Never immerse the base in water.
• WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK OR FIRE, DO NOT REMOVE THE BASE PANEL. NO USER
SERVICEABLE PARTS ARE INSIDE. REPAIR SHOULD BE DONE ONLY BY AUTHORIZED PERSONNEL.
• A short power cord is provided to reduce risks resulting from becoming entangled in or tripping over a
longer cord.
• Longer, detachable power supply cords or extension cords are available and may be used if care is exer-
cised in their use.
• If an extension cord is used, the marked electrical rating should be at least as great as the electrical rating
of the appliance. If the appliance is provided with 3- wire, grounding type cord, the extension should be
a GROUNDING TYPE 3 - WIRE CORD. The longer cord should be arranged so that it will not drape over
the counter-top or table top where it can be pulled on by children or tripped over.
• Your product is equipped with a polarized alternating current line plug (a plug having one blade wider
than the other). This plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safe-
ty purpose of the polarized plug.
4
All manuals and user guides at all-guides.com
SAVE THESE INSTRUCTIONS

SHORT CORD INSTRUCTIONS