Assigning Names And Seat Numbers; Retain Seat Information; Funcionalidad De La Tarjeta Nfc; Speak Priority - Shure MXCW Microflex Manual Del Usuario

To return to default settings, open

Assigning Names and Seat Numbers

The chairperson and meeting operators will need to refer to the participants by either name, seat number, or both. The proper
assignment of names and seat numbers is critical to ensure the continuity of the discussion.
When setting up the installation for the first time, each conference unit appears with its default name and an automatically as­
signed seat number according to the order they were powered on. Use the Devices tab to match wireless devices to the antici­
pated seating chart.
Note: Devices already display the participant's name if an NFC card is inserted. See NFC Card Functionality for more details.
1. Draw a seating chart, or diagram, that represents the room. Number each seat that requires a microphone. Add partici­
pant names to the seating chart.
2. Provide seat names by clicking the seat name field and writing the new name for each unit.
3. Reorder seats to match the actual seat numbers in the room or on your seating chart:
◦ To move a single seat, click in the seat field for that row and enter the new number. If another seat already exists in
that number, it will exchange positions with the other seat.
◦ To move multiple seats, click
pressing each device's speak buttons in the preferred order. This will remap devices according to the order the but­
tons are pressed.

Retain Seat Information

Device settings, such as seat name and seat number, are saved during a power cycle by default. To stop saving seat informa­
tion click the save icon > Disable. Click the

Funcionalidad de la tarjeta NFC

Utilice la aplicación gratuita de programación de tarjetas NFC de Shure (disponible en www.shure.com) para programar tarje­
tas de identificación NFC con los nombres de los participantes en la reunión.
La aplicación NFC Card Programming está diseñada para trabajar con tarjetas ACOS3 de doble interfaz o sin contacto, como
la MXCDualCard, y utiliza el programador de tarjetas USB ACR1252U (www.acs.com.hk) para escribir los nombres de los par­
ticipantes en las tarjetas de identificación.
Para permitir la funcionalidad NFC para las unidades de conferencia:
1. Vaya a Controles de reunión > Avanzado > Habilitar NFC.
2. Inserte una tarjeta NFC en la unidad de conferencia para que los participantes se identifiquen por su nombre.
Nota: Las tarjetas NFC no son compatibles con las unidades de conferencia de doble delegado.

Speak Priority

When speaker interruption is enabled, participants can override each other in the speaker list based on their speak priority and
their role.
Manually adjust the speak priority of each participant to meet the needs of your meeting.
more options and select Reset.
more options > Push-to-renumber. Enable this mode to rearrange seats by
save icon > Retain to start saving seat information again.
Shure Incorporated
46/93