Dry Ironing; Steam Ironing; Special Features - Oster GCSTCW-317-013 Manual De Instrucciones

Filling Water Reservoir (use tap water)
1. Turn Steam Lever to
2. Raise the Water Fill Hole Cover. Hold the iron at a 45 degree angle and use any
easy-pour measuring cup to fill the water reservoir with tap water through the water fill
hole. Do not fill water reservoir beyond maximum fill line.
WARNING: To prevent the risk of burns, be careful when filling a hot iron with water. Hot
metal parts, hot water and steam can cause injuries.
1. Ensure Steam Lever is turned to the
2. Plug the cord into a 127V AC outlet.
3. Turn Fabric Select Setting to desired setting. Allow iron to heat for 2 minutes on its
heel rest on a stable, protected surface.
NOTE: While Steam Lever is turned to the
OF STEAM or SPRAY MIST
®
wool, cotton, or linen. Water reservoir must be at least ¼ full of water.
1. Fill Water Reservoir and plug the cord into a 127V AC outlet.
2. Turn the Fabric Select Setting to desired setting. Allow the iron to heat for 2 minutes
on its heel rest on a stable, protected surface. Turn Steam Lever to desired setting.
CAUTION: When not ironing, always set the Steam Lever to
Select Setting to OFF.
SPRAY MIST FEATURE is a powerful water spray mist that dampens the fabric to aid in
®
removing wrinkles from heavy fabrics and for setting creases.
TO USE: Press the Spray Mist
SHOT OF STEAM
stubborn wrinkles. You can use this feature while Dry or Steam ironing as long as the
Fabric Select Setting is set to wool, cotton, or linen. The water reservoir must be at least
¼ full of water.
TO USE: Place the iron on top of the wrinkle and press the Shot of Steam
time you would like an extra burst of steam. The Shot of Steam
continuously in approximately 3-second intervals.
NOTE: Shot of Steam pump may require priming for initial use. To prime simply push the
button firmly 10-15 times repetitively.
VERTICAL SHOT OF STEAM
steamer.
GCSTCW-317_GCSTCB-200_19ESM2 (LA).indd 3
(Dry) and Fabric Select Setting to Off. Unplug.

Dry Ironing

features, as long as the Fabric Select Setting is set to
®

Steam Ironing

Special Features

button firmly.
®
FEATURE provides an extra burst of steam for deep penetration of
®
FEATURE allows iron to function vertically as a garment
®
English - 3
(Dry) setting.
(Dry) setting, you may still use the SHOT
(Dry) and the Fabric
feature may be used
®
button each
®
9/11/19 08:52