Dry Ironing; Steam Ironing - Oster DURA PRESS 6020 Manual De Instrucciones

1. Make sure the Steam Lever is turned to the O/Off (Dry) setting.
2. Plug the Cord into the outlet.
3. Turn the Fabric Select Dial to the fabric setting you desire
(Silk or Synthetics).
Allow the Iron to heat for 2 minutes. While the Iron is heating,
make sure it is sitting on its heel rest on a stable, protected
surface.
NOTE: While the Steam Lever is turned to the O/Off (Dry)
setting, you may still use the SHOT OF STEAM®
or SPRAY MIST® features. Please make sure the
Water Reservoir is 1/4 full of water.
TIP: Refer to the "Ironing Guide" for the recommended setting for your fabric.
1. Follow the instructions for "Filling With Water".
2. Plug the Cord into the outlet. The Power Indicator will light.
3. Turn the Fabric Select Dial to the steam ironing fabric setting
you desire (Linen, Cotton, Wool or Silk) and allow the Iron to
heat for 2 minutes. While the Iron is heating, make sure it is
sitting on its heel rest on a stable, protected surface.
TIP: Refer to the "Ironing Guide" for the recommended setting for your fabric.
4. After the Iron has heated (2 minutes), turn the Steam Lever
to desired steam setting.
IMPORTANT: When not ironing, always set the Steam Lever
to O/Off and the Fabric Select Dial to Off/Apag.

Dry Ironing

Steam Ironing

6