Technical Specifications; Faqs And Solutions - Trevi MAX 10 Manual De Usuario

Standard:........................................................................................ GSM
GSM frequencies: ........................... Quad Band
Display: ................................................................................... 1.77 Inch
Battery: ............................................. rechargeable Li-ion 3,7V- 800mAh
Autonomy (at full charge): ............................ Stand-by: 180 hours aprox.
Bluetooth: .......................................................................................V 2.0
Bluetooth transmission power: .....................................................2,5mW
Bluetooth band transmission: ...................................................... 2,4GHz
Dimensions: ............................................................115,6x 55,5x 15mm
Weight: ......................................................................
If you have any questions about the phone, please find the solutions from the table below.
FAQs
Poor reception
Echoes or noises
Shorter standby time
Failed to turn on your phone

Technical specifications

FAQS and solutions

Causes
When you use your phone at poor
reception areas, like near high rise
buildings or base rooms, the radio
wave cannot be transmitted.
When you use your phone at
network traffic congestion, such
as working time and off-duty time,
the congestion can result in poor
reception.
This is related to the distance to
base station in question.
The trunk line of network is in bad
condition. It is a regional problem.
In some areas, the call lines are in
bad condition.
The standby time is relevant to
network settings.
Replace the batteries
When no signals are received,
your phone will continue searching
for base stations, thus consuming
a large amount of battery power
and reducing standby time.
The battery power is used up.
34
850/900/1800/1900MHz
continuous: 4 hours aprox.
74gr (with battery)
Solutions
Avoid this as far as you can.
Avoid this as far as you can.
You may to provide service
coverage map.
Hang off the call and dial again.
Choose another better line.
In poor reception areas, turn off
your phone temporarily.
Change with a new battery.
Use your phone at strong signal
areas or Turn off the phone
temporarily.
Check the battery power level or
charge the battery.