Tabla de contenido
CONTROL PANEL
Important Notice!: The temperature of the wax will be selected by the thermostat (2), does not
correspond with the temperature dial indicator water level (5), since it does not act as a thermometer (this
will mark a difference to least about 20 °).
Before treatment, the body part should be cleaned with soap and water, then with alcohol to
remove any soap residue and prevent bacterial growth on the bottom of the bath.
Carefully pour the wax with a casserole on the hand or foot or put your hand or foot for several
seconds in the bathroom. Then take off, in order to form a thin coating of paraffin slightly
hardened and adherent to the skin .
The operation is repeated 8 to 12 times until it forms a thick layer of paraffin wax. Then the area
is wrapped in a plastic bag and covered with several towels in order to facilitate heat retention.
The body area should be removed of any metallic objects and must ensure that the area does not
move once introduced in the bath to avoid the appearance of "hot spots".
By moving the part introduced in the molten paraffin, there is a risk of interrupting the semisolid
parafine barrier, by which the patient could feel a burning sensation. The hand will be immersed
with fingers extended and separated as possible.
The patient should be in a comfortable position, with elevated until the end of the treatment, to
avoid the potential appearance of edema.
The application is maintained for 15 to 20 min.
After this time, remove the towel and bag, and remove the layer of solid paraffin and put into the
bath, but previosly sterilized at 80 ° C, or with boiling water
After application, verify the condition of the skin.
After application, the area should be cleaned with soap and water. The cleaning can be
completed with a gentle massage with a moisturizing lotion or mineral oil to moisturize and
soften the skin.
After applying wax, the skin is smoother, softer, moist and flexible, making it easier to massage
and mobilization.
To extend the life of the product, you must unplug it and keep it disconnected from the outlet
when not be used for some periods of time.
Store in a dry place.
Allow to cool before storing.
Don stack objects in its top.
Do not place heavy objects.
Ortotecsa,s.l. C/Peña de Francia,8
Tlf.:+34918719132
APPLICATION
PRODUCT STORING
28500 Arganda del Rey (Madrid), España.
Fax: +34918719323
email:
INSTRUCCIONES DE USO Y MANTENIMIENTO
USER AND MAINTENANCE MANUAL
Last Revision 12/03/2020
MAIN SWITCH
PILOT FOR INDICATING TEMPERATURE
HAS BEEN REACHED
www.ortotecsa.com
Página 25 de 37
Tabla de contenido
