Offline Profile; 3-D Tones - Nokia N73 Manual Del Usuario

If you want the caller's name to be said when your device
rings, select Options
name to On. The caller's name must be saved in Contacts.
To create a new profile, select

Offline profile

The Offline profile lets you use the device without connecting
to the wireless network. When you activate the
profile, the connection to the wireless network is turned off,
as indicated by
wireless RF signals to and from the device are prevented. If
you try to send messages, they are placed in the outbox to
be sent later.
Important: In the offline profile you cannot make
or receive any calls, or use other features that
require cellular network coverage. Calls may still
be possible to the official emergency number
programmed into your device. To make calls, you
must first activate the phone function by changing
profiles. If the device has been locked, enter the
lock code.
To leave the Offline
another profile. The device re-enables wireless transmissions
(providing there is sufficient signal strength). If Bluetooth
connectivity is activated before entering the
it will be deactivated. Bluetooth connectivity is automatically
reactivated after leaving the
See "Settings," p. 79.
92
> Customize, and set Say caller's
Options > Create
in the signal strength indicator area. All
profile, press the power key, and select
Offline
Offline profile.

3-D tones

Press , and select
new.
you can enable three-dimensional sound effects for
ringing tones. Not all ringing tones support 3-D effects.
To enable the 3-D effects, select
Offline
On. To change the ringing tone, scroll to the ringing tone that
is displayed, press
To change the 3–D effect that is applied to the ringing
tone, select Sound trajectory
modify the effect, select from the following settings:
Trajectory speed—Select the speed at which sound moves
from one direction to another. This setting is not available
for all effects in
Reverberation—To adjust the amount of echo, select the
desired effect in the list.
Doppler effect—Select
higher when you are closer to your device, and lower when
you are farther away. When you get closer to the device,
the ringing tone appears to become higher, and lower when
you move away from it. This setting is not available for all
effects in Sound
profile,
To listen to the ringing tone with the 3–D effect, select
Options > Play
Tools > 3-D tones. With
3-D ringing tone effects
, and select the desired ringing tone.
and the desired effect. To
Sound trajectory.
On to have the ringing tone sound
trajectory.
tone.
3-D tones
>