TROQX QX2500T Instrucciones De Instalación Y Funcionamiento página 5

8
CABLE CONNECTION FOR ATV
EN
SOLENOID ASSEMBLY PARTS LIST FOR ATV
Item Qty Description
1 1 Solenoid Assembly
2 1 Remote Control Wire
3 1 Remote Control Switch
4 1 Black lead-input 8 mm² × L450 mm
5 1 Red lead-input 8 mm² × L600 mm
6 1 Black lead-output 8 mm² × L2350 mm
7 1 Red lead-output 8 mm² × L2300 mm
8 1 Protecting PVC Sleeve
1) Take the Solenoid Cover away.
2) Connect Short Red Cable (#5) to
Battery positive terminal with one
end, and with the other end to
terminal of the Solenoid.
3) Connect Short Black Cable (#4)
to Battery negative terminal with
one end, and with the other end to
terminal of the Solenoid.
4) Connect Long Red Cable (#7) to
terminal A of the Solenoid with one
end, and with the other end to one
of motor terminal.
5) Connect Long Black Cable (#6) to
Handleiding_02.indd 8-9
terminal B of the Solenoid with one
end, and with the other end to one of
motor terminal.
6) Connect the Remote Control (#3)
into the Female Connector (#2).
7) Test the winch by running the
motor to check the running direction
of the winch drum. If the direction
is wrong, exchange the motor ter-
minals' cable connection.
8) Restore the Solenoid Cover and fix it
tightly with screws previously taken off.
CABLE CONNECTION FOR ATV
Blue
160±10
Yellow
Red
B
100
Black
Red
WIRELESS REMOTE CONTROL CABLE CONNECTION
REMOTE CONTROL
9
EN
2450±10
Red to Battery
Black to Battery
To motor terminals
Black to Battery
Blue
Brown
Yellow Green to Battery
25-03-11 11:10